Pepperl+Fuchs FVM58
Multiturn absolute encoder

Pepperl+Fuchs FVM58
  • Industrial standard housing empty-58 mm
  • 25-bit multiturn
  • Output code: gray and binary
  • Short-circuit proof push-pull output
  • Inputs for selecting counting direction, LATCH, and PRESET
  • Code change frequency up to 400 kHz
  • Servo or clamping flange
Item Number: FVM58
Price on Request
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Comments
De-energized delay300 ns
Rotational speedmax. 12000 min -1
Connectortype 9426, 26-pin
L10h1.9 E+11 at 6000 rpm and 20/40 N axial/radial shaft load
Code course (counting direction)cw ascending (clockwise rotation, code course ascending)
Noise immunityEN 61000-6-2:2005
Climatic testingDIN EN 60068-2-3, no moisture condensation
Power consumption 2.5 W , without output drivers
Shock resistanceDIN EN 60068-2-27, 100 g, 6 ms
Voltage drop 2.5 V
Input current< 6 mA
Starting torque 5 Ncm
Emitted interferenceEN 61000-6-4:2007
Input typeSelection of counting direction (cw/ccw)
Switch-on delay< 1 ms
Operating voltage10 ... 30 V DC
No-load supply currentmax. 140 mA
Input typeTemporary storage (LATCH)
Load current20 mA
Massapprox. 400 g (combination 1)
approx. 800 g (combination 2)
Code preparation time0.3 ms
Vibration resistanceDIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Code change frequency400 kHz
Rise time300 ns
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F) (cable models: -5 ... 70 В°C)
Switch-on delay< 0.1 ms
LinearityВ± 0.5 LSB
Input current< 6 mA
Degree of protectionDIN EN 60529, IP65
Input current< 6 mA
Switch-off delay< 0.1 ms
Cableandempty;9 mm, 15 x 2 x 0.14 mm2, 2 m
MTTFd110 a
Output codeGray code, binary code
Interface typePush-pull, parallel , short-circuit protected
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Input typezero-set (PRESET)
UL approvalcULus Listed, General Purpose, Class 2 Power Source
Operating temperature-40 ... 85 В°C (-40 ... 185 В°F)
cable models:
-30 ... 70 В°C (rigid wiring)
-5 ... 70 В°C (flexible wiring)
Moment of inertia30 gcm2

Comments

No comments yet

Write a comment