Pepperl+Fuchs HiC2025HC
SMART Transmitter Power Supply
- 1-channel isolated barrier
- 24 V DC supply (bus powered)
- Input for 2-wire SMART transmitters and current sources
- Output for 4 mA ... 20 mA or 1 V ... 5 V
- Low power dissipation
- Suitable for long field cables (> 1000 m)
- Up to SIL 2 acc. to IEC 61508
- Overview
- Comments
| Ripple | 20 mV rms |
| Rise time/fall time | ≤ 20 ms |
| Connection | SL1: 8a(+), 7a(-) |
| Dimensions | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) |
| Rated voltage | 19 ... 30 V DC bus powered via Termination Board |
| Control elements | DIP-switch |
| Rated current | ≤ 45 mA |
| EU-Type Examination Certificate | CESI 11 ATEX 012 |
| Degree of protection | IP20 |
| Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
| Signal type | Analog input |
| IECEx approval | IECEx CES 11.0010 |
| Power dissipation | ≤ 800 mW |
| Connection | SL2: 5a(+), 1b(-); 5a(+), 5b(-) |
| Mounting | on Termination Board |
| Settling time | ≤ 200 ms |
| Safety Integrity Level (SIL) | SIL 2 |
| Mass | approx. 100 g |
| Connection side | field side |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Connection side | control side |
| Degree of protection | IEC 60529:2001 |
| Labeling | space for labeling at the front |
| Deviation | at 20 В°C (68 В°F) ≤ В± 20 µA incl. calibration, linearity, hysteresis, loads and supply voltage fluctuations (source mode and sink mode 4 ... 20 mA) ≤ 10 mV incl. calibration, linearity, hysteresis and fluctuations of supply voltage (source mode 1 ... 5 V) |
| Output signal | 4 ... 20 mA or 1 ... 5 V (on 250 Ω, 0.1 % internal shunt) 4 ... 20 mA (sink mode), operating voltage 14 ... 25 V |
| Available voltage | ≥ 15 V at 20 mA on SL2: 5a(+), 5b(-) |
| Load | 0 ... 300 Ω (source mode) |
| Electromagnetic compatibility | NE 21:2012 For further information see system description. |
| Configuration | via DIP switches |
| Display elements | LED |
| Frequency range | field side into the control side: bandwidth with 1 mApp signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB) |
| Ripple | ≤ 10 % |
| Input signal | 4 ... 20 mA , limited to approx. 27 mA |
| Voltage drop | approx. 3 V on SL2: 5a(+), 1b(-) ; reverse polarity protected |
| Certificate | PF 11 CERT 1845 X |
| Power consumption | ≤ 1.1 W |
Comments
No comments yet