Pepperl+Fuchs HiC2441
SMART Universal Barrier
We ship to United States of America!
- 1-channel isolated barrier
- 24 V DC supply (bus powered)
- Analog input, digital input,
analog output, digital output - No configuration required, device is self-adapting
- HART transparency
- Low power dissipation
- 3-way isolation
- Up to SIL 2 acc. to IEC 61508
Item Number:
HiC2441
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
Contact our experts
- Overview +
- Comments +
| Ambient temperature | -40 ... 70 ?°C (-40 ... 158 ?°F) Observe the temperature range limited by derating, see section derating. |
| Field circuit | SL2: 5a(+), 5b(-) |
| Signal type | Universal |
| Frequency range | HART: bandwidth by 0.5 Vpp signal and/or 1 mApp signal 950 ... 2500 Hz (analog input, analog output) |
| Input | EN 60947-5-6:2000 |
| Ripple | 20 mV rms |
| Power consumption | 700 mW |
| Voltage | 12 ... 30 V |
| UL approval | E106378 |
| Protection against electrical shock | IEC 61010-1:2010 |
| Equipment | SL2: 5a(+), 1a(-) |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Deviation | at 20 ?°C (68 ?°F) ?±20 andmicro;A incl. linearity, hysteresis and supply fluctuations at 4 ... 20 mA (analog input, analog output) ?±60 andmicro;A incl. linearity, hysteresis and supply fluctuations at 0 ... 45 mA (digital output) |
| Signal | 0.1 ... 9 mA |
| Supply voltage | min. 16 V at 20 mA (2-wire SMART transmitter) |
| Control circuit | SL1: 8a(+), 7a(-) |
| Switching frequency | 500 Hz with 50 % duty cycle (digital input, NAMUR sensor) 5 Hz (digital input, dry contact) 20 Hz (digital output) |
| Field circuit | SL2: 5a(+), 5b(-) |
| Voltage | 1-signal: 19 ... 30 V DC 0-signal: 0 ... 5 V DC |
| Equipment | SL2: 5a(+), 1b(-) |
| Suitable field devices | I/P converters (positioner), on-site-displays |
| Load | 0 ... 650 andOmega; |
| Line fault detection | > 100 kandOmega; at max. 30 V, with field wiring open |
| Coding | pin 1 and 4 trimmed For further information see system description. |
| Suitable field devices | NAMUR sensors according to IEC/EN 60947-5-6, dry contacts |
| Rated current | 30 mA |
| Drive capability | 12 V / 40 mA at 300 andOmega; load |
| Certificate | T??V 14 ATEX 153523 X |
| Signal | 0/4 ... 20 mA , sink mode , working voltage 15 ... 30 V |
| Ripple | 10 % |
| Current limit | 45 mA |
| Suitable field devices | solenoid valves, acoustic or visual alarms |
| Signal | 0/4 ... 20 mA |
| Safety Integrity Level (SIL) | SIL 2 |
| Voltage | 13 V at 20 mA |
| Mounting | on Termination Board |
| EU-Type Examination Certificate | T??V 14 ATEX 153522 X |
| Voltage drop | approx. 4 V (current source) |
| Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
| Equipment | SL2: 5a(+), 5b(-) |
| Power dissipation | 1.1 W at 24 V, 300 andOmega; load (digital output) |
| Field circuit | SL2: 5a(+), 1a(-) (NAMUR sensor) SL2: 5a(+), 5b(-) (dry contact) |
| Signal | 0/4 ... 20 mA , limited to approx. 40 mA (depends on control system) , reverse polarity protected |
| Storage temperature | -40 ... 85 ?°C (-40 ... 185 ?°F) |
| Settling time | 20 ms (analog input, analog output) 1 ms (digital input, NAMUR sensor) |
| Suitable field devices | 2-wire SMART transmitters, current sources |
| Control circuit | SL1: 8a(+), 7a(-) |
| Voltage | 13 ... 30 V |
| Electromagnetic compatibility | NE 21:2011 |
| Signal | 0.1 ... 9 mA , sink mode |
| Open loop voltage | approx. 22 V |
| Field circuit | SL2: 5a(+), 5b(-) (2-wire SMART transmitter) SL2: 5a(+), 1b(-) (2-wire SMART transmitter with current source) |
| Open loop voltage | approx. 10 V DC , 1 kandOmega; series resistance |
| Degree of protection | IP20 |
| Rated voltage | 19 ... 30 V DC via Termination Board |
| Degree of protection | IEC 60529:2001 |
| Voltage | 15 ... 30 V |
| Relative humidity | 95 % non-condensing |
| Ripple | 20 mV rms |
| Mass | approx. 100 g |
| Control circuit | SL1: 8a(+), 7a(-) |
| Control circuit | SL1: 8a(+), 7a(-) |
| Control/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
| Internal resistor | min. 240 andOmega; |
| Signal | 0/4 ... 20 mA |
| Current | 1-signal: 0 ... 45 mA, depending on the output load 0-signal: < 0.1 mA, independent of the output load |
| Dimensions | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) |
| Reaction time | 5 ms , turn-on/turn-off time (digital output) |
Buy Pepperl+Fuchs HiC2441 with the best possible price and delivery terms on eltra-trade.com
eltra-trade.com is an electrical supply store online. We provide an enhanced product catalog for our clients. Rush shipping is available to any country. We supply only certified products from European brands. We always strive to correspond with the delivery times. Our company has a very well-established supply chain so we always provide the equipment on time and without delay.
Comments
No comments yet