Pepperl+Fuchs HiC2831
Switch Amplifier
- 1-channel isolated barrier
- 24 V DC supply (bus powered)
- Dry contact or NAMUR input
- Usable as signal splitter (1 input and 2 outputs)
- 2 passive transistor outputs (resistive acc. to EN 60947-5-6)
- Line fault transparency (LFT)
- Up to SIL 2 acc. to IEC 61508
Item Number:
HiC2831
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Output I, II | signal or error message, passive transistor output (resistive) 0-signal: 14 kandOmega; В± 10 % 1-signal: 1.8 kandOmega; В± 10 % fault: > 100 kandOmega; |
Control elements | DIP-switch |
Connection | SL1: 8a(+), 7a(-); 10a(+), 9a(-) |
Rated values | acc. to EN 60947-5-6 (NAMUR), see system description for electrical data |
Connection | SL1: 6b |
Labeling | space for labeling at the front |
Response time | 200 micro/s |
Mounting | on Termination Board |
Degree of protection | IEC 60529:2001 |
Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
Certificate | KIWA 15 ATEX 0037 X |
Mass | approx. 100 g |
Connection side | control side |
Electromagnetic compatibility | NE 21:2012 , EN 61326-3-2:2008 |
EU-Type Examination Certificate | BVS 11 ATEX E 026 |
Output/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
Degree of protection | IP20 |
Line fault detection | breakage I 0.1 mA , short-circuit I 6.5 mA |
Safety Integrity Level (SIL) | SIL 2 |
Connection | SL2: 5a(+), 5b(-) |
Open circuit voltage/short-circuit current | approx. 10 V DC / approx. 8 mA |
Switching frequency | 5 kHz |
Power consumption | 600 mW |
Signal type | Digital Input |
Protection against electrical shock | IEC 61010-1 |
Output/Output | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
Output type | open collector transistor (internal fault bus) |
Rated voltage | 8 V DC |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Configuration | via DIP switches |
Power dissipation | 500 mW |
Display elements | LEDs |
Pulse/Pause ratio | min. 100 micro/s / min. 100 micro/s |
Coding | pin 1 and 2 trimmed For further information see system description. |
Dimensions | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) |
Rated current | 25 mA |
Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
Connection side | field side |
Rated voltage | 19 ... 30 V DC bus powered via Termination Board |
Ripple | 10 % |
People also buy
Comments
No comments yet