Pepperl+Fuchs HiC2831R2
Switch Amplifier

Pepperl+Fuchs HiC2831R2
  • 1-channel isolated barrier
  • 24 V DC supply (bus powered)
  • Dry contact or NAMUR inputs
  • Application-specific outputs
  • Usable as signal splitter (1 input and 2 outputs)
  • 2 passive transistor outputs (resistive)
  • Line fault transparency (LFT)
  • Up to SIL 2 acc. to IEC 61508
Item Number: HiC2831R2
261.94
-
+
Total price: 261.94
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Mountingon Termination Board
Massapprox. 100 g
CertificateKIWA 15 ATEX 0037 X
Switching frequency 5 kHz
Labelingspace for labeling at the front
Dimensions12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch)
Power consumption 600 mW
Signal typeDigital Input
Output typeopen collector transistor (internal fault bus)
Line fault detectionbreakage I 0.1 mA , short-circuit I 6.5 mA
Output/Outputbasic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff
Rated current 25 mA
Rated valuesacc. to EN 60947-5-6 (NAMUR), see system description for electrical data
Ripple 10 %
Codingpin 1 and 2 trimmed
For further information see system description.
ConnectionSL2: 5a(+), 5b(-)
Control elementsDIP-switch
Rated voltage19 ... 30 V DC
Connection sidefield side
Rated voltage19 ... 30 V DC bus powered via Termination Board
Output/power supplybasic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff
EU-Type Examination CertificateBVS 11 ATEX E 026
Safety Integrity Level (SIL)SIL 2
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Open circuit voltage/short-circuit currentapprox. 10 V DC / approx. 8 mA
Response time 200 micro/s
Degree of protectionIP20
Electromagnetic compatibilityNE 21:2012 , EN 61326-3-2:2008
Output I, IIsignal or error message, passive transistor output (resistive)
0-signal: 15 kandOmega; В± 5 %
1-signal: 5 kandOmega; В± 5 %
fault: > 100 kandOmega;
Connection sidecontrol side
Degree of protectionIEC 60529:2001
Pulse/Pause ratiomin. 100 micro/s / min. 100 micro/s
ConnectionSL1: 1a(-), 1b(-); 2a(+), 2b(+)
Switching point/switching hysteresis1.2 ... 2.1 mA / approx. 0.2 mA
Protection against electrical shockIEC 61010-1
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Display elementsLEDs
Configurationvia DIP switches
Power dissipation 500 mW
ConnectionSL1: 6b
ConnectionSL1: 8a(+), 7a(-); 10a(+), 9a(-)

Comments

No comments yet

Write a comment