Pepperl+Fuchs HiC2832R1
Switch Amplifier
- 2-channel isolated barrier
- 24 V DC supply (bus powered)
- Dry contact or NAMUR inputs
- Application-specific outputs
- 2 passive transistor outputs (resistive)
- Line fault transparency (LFT)
- Up to SIL 2 acc. to IEC 61508
Item Number:
HiC2832R1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Labeling | space for labeling at the front |
| Degree of protection | IP20 |
| Ripple | 10 % |
| Power dissipation | 600 mW |
| Response time | 200 micro/s |
| Signal type | Digital Input |
| Line fault detection | breakage I 0.1 mA , short-circuit I 6.5 mA |
| Coding | pin 1 and 2 trimmed For further information see system description. |
| Dimensions | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) |
| Connection | SL1: 6b |
| EU-Type Examination Certificate | BVS 11 ATEX E 026 |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Connection | SL2: 5a(+), 5b(-); 1a(+), 1b(-) |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
| Connection side | field side |
| Connection side | control side |
| Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
| Output type | open collector transistor (internal fault bus) |
| Pulse/Pause ratio | min. 100 micro/s / min. 100 micro/s |
| Switching frequency | 5 kHz |
| Mass | approx. 100 g |
| Control elements | DIP-switch |
| Output I, II | signal or error message, passive transistor output (resistive) 0-signal: 33 kandOmega; В± 5 % + voltage drop 6.5 V В± 0.5 V 1-signal: voltage drop 6.5 V В± 0.5 V fault: > 100 kandOmega; |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Electromagnetic compatibility | NE 21:2012 , EN 61326-3-2:2008 |
| Rated current | 30 mA |
| Rated voltage | 19 ... 30 V DC bus powered via Termination Board |
| Mounting | on Termination Board |
| Output/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
| Open circuit voltage/short-circuit current | approx. 10 V DC / approx. 8 mA |
| Connection | SL1: 8a(+), 7a(-); 10a(+), 9a(-) |
| Safety Integrity Level (SIL) | SIL 2 |
| Degree of protection | IEC 60529:2001 |
| Protection against electrical shock | IEC 61010-1 |
| Display elements | LEDs |
| Power consumption | 700 mW |
| Output/Output | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
| Rated voltage | 19 ... 30 V DC with external resistance > 2 kandOmega;, e. g. 16-channel ProSafe DI card SDV144 from Yokogawa |
| Certificate | KIWA 15 ATEX 0037 X |
| Rated values | acc. to EN 60947-5-6 (NAMUR), see system description for electrical data |
| Configuration | via DIP switches |
Comments
No comments yet