Pepperl+Fuchs HiC2842

Switch Amplifier
Pepperl+Fuchs HiC2842
204.40
One click request
Pulse/Pause ratiomin. 100 µs / min. 100 µs
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Relative humidity≤ 90 % , non-condensing
Output/Outputbasic insulation acc. to EN 50178, rated insulation voltage of 50 V AC
Rated current50 mA
Signal level1-signal: (external voltage) - 1 V max. for 50 mA (Tamb = 25 В°C (77 В°F))
0-signal: blocked output (off-state current ≤ 10 µA)
Configurationvia DIP switches
Electromagnetic compatibilityNE 21:2006
For further information see system description.
EU-type examination certificateBVS 09 ATEX E 157
Protection against electrical shockIEC 61140
Connection sidefield side
ConnectionSL2: 5a(+), 5b(-); 1a(+), 1b(-)
Rated current≤ 30 mA
Labelingspace for labeling at the front
Rated valuesacc. to EN 60947-5-6 (NAMUR), see manual for electrical data
Mountingon Termination Board
Output typeopen collector transistor (internal fault bus)
Response time≤ 200 µs
Switching frequency≤ 5 kHz
Line fault detectionbreakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
Display elementsLEDs
Dimensions12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch)
Output/power supplybasic insulation acc. to EN 50178, rated insulation voltage of 50 V AC
Codingpin 1 and 2 trimmed
For further information see system description.
ConnectionSL1: 6b
Rated voltage19 ... 30 V DC bus powered via Termination Board
Control elementsDIP-switch
Galvanic isolationEN 50178:1997
Massapprox. 100 g
Signal typeDigital Input
Switching point/switching hysteresis1.2 ... 2.1 mA / approx. 0.2 mA
Output IIsignal ; Transistor
Rated voltage30 V DC
ConnectionSL1: 1a(-), 1b(-); 2a(+), 2b(+)
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Power consumption≤ 700 mW
IECEx approvalIECEx BVS 09.0060
ConnectionSL1: 8a(+), 7a(-); 10a(+), 9a(-)
Safety Integrity Level (SIL)SIL 2
Open circuit voltage/short-circuit currentapprox. 10 V DC / approx. 8 mA
Degree of protectionIEC 60529
Ripple≤ 10 %
Power dissipation≤ 600 mW
Degree of protectionIP20
Connection sidecontrol side
Output Isignal ; Transistor
in international format without spaces
All fields are required