Pepperl+Fuchs HiCTB08-SCT-44C-SC-RA
Termination Board
- For 8 modules
- 24 V DC supply
- Supported signal types: DI/DO/AI/TI/AO
- Hazardous area: screw terminals, blue
- Non-hazardous area: screw terminals, black
Item Number:
HiCTB08-SCT-44C-SC-RA
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Output type | volt-free contact |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Core cross-section | screw terminals: 0.25 ... 1.5 mm2 (24 ... 12 AWG) |
| Degree of protection | IEC 60529:2001 |
| EU-Type Examination Certificate | CESI 06 ATEX 022 |
| Ripple | 10 % |
| Contact loading | 30 V DC, 1 A |
| Power dissipation | 500 mW , without modules |
| Degree of protection | IP20 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Mass | approx. 450 g |
| Nominal voltage | 24 V DC , in consideration of rated voltage of used isolators |
| Reverse polarity protection | yes |
| Voltage drop | 0.9 V , voltage drop across the series diode on the termination board must be considered |
| Display elements | LED PWR1 (termination board power supply), green LED LED PWR2 (termination board power supply), green LED LED FAULT (fault indication), red LED - LED lits: module failure - LED flashes: power supply failure |
| Dimensions | 108 x 200 x 163 mm (4.25 x 7.9 x 6.42 inch) , height including module assembly |
| Fusing | 2 A , in each case for 8 modules |
| Certificate | DEMKO 18 ATEX 2116 X |
| Material | housing: polycarbonate, 10 % glass fiber reinforced |
| Electromagnetic compatibility | NE 21:2017 For further information see system description. |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Connection | X20: terminals 3, 5 (+); 4, 6 (-) |
| Supply | Redundancy available. The supply for the isolators is decoupled, monitored and fused. |
| Connection | X20: terminals 1, 2 |
| Designation | optional accessories: - HART communication board HiATB01-HART-4X8-Y1 - HART multiplexer master HiDMux2700 - HART connection cable HiACA-UNI-FLK34-*M* - label carrier HiALC-Hi*TB-SET-1** |
Comments
No comments yet