Pepperl+Fuchs HiCTB16-YRS-RRB-AK-CC-DI16
Termination Board
- System board for Yokogawa ProSafe-RS
- For 16-channel DI card SDV144
- For 16 modules
- Recommended modules: HiC2831R1 (DI), HiC2853R1 (DI)
- 24 V DC supply
- Hazardous area: spring terminals, blue
- Safe area: Yokogawa system connector, 50-pin
Item Number:
HiCTB16-YRS-RRB-AK-CC-DI16
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Electromagnetic compatibility | NE 21:2012 For further information see system description. |
| Mass | approx. 650 g |
| Ripple | ≤ 10 % |
| Fusing | 4 A , in each case for 16 modules |
| Dimensions | 240 x 175 x 153 mm (9.45 x 6.9 x 6.02 inch) , height including module assembly |
| Supply | Redundancy available. The supply for the isolators is decoupled, monitored and fused. |
| Material | housing: polycarbonate |
| Display elements | LEDs PWR ON (Termination Board power supply) - LED power supply I, green LED - LED power supply II, green LED LED FAULT (fault indication), red LED - LED flashes: power supply failure |
| Power dissipation | ≤ 500 mW , without modules |
| Contact loading | 30 V DC , 1 A |
| Reverse polarity protection | yes |
| Core cross-section | spring terminals: rigid: 0.2 ... 2.5 mm2 flexible: 0.25 ... 1.5 mm2 |
| Degree of protection | IP20 |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| IECEx approval | IECEx CES 06.0003 |
| Nominal voltage | 24 V DC , in consideration of rated voltage of used isolators |
| Voltage drop | 0.9 V , voltage drop across the series diode on the termination board must be considered |
| Degree of protection | IEC 60529:2001 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Output type | volt-free contact |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| EU-Type Examination Certificate | CESI 06 ATEX 022 |
Comments
No comments yet