Pepperl+Fuchs HiD2012
SMART Current/Voltage Converter
This item is out of production!
- 2-channel isolated barrier
- 24 V DC supply (bus powered)
- Current and voltage input
- Analog current and voltage output
- Sink and source mode outputs
- SMART pass-through
- Overview
- Comments
This item is out of production!
Check with the manager for a replacement.
| Electromagnetic compatibility | NE 21:2006 For further information see system description. |
| EU-Type Examination Certificate | CESI 02 ATEX 086 |
| Control elements | DIP-switch potentiometer |
| Input current | 0/4 ... 20 mA |
| Ripple | max. 15 mV rms |
| Connection | SL2: 5a(+), 5b(-); 1a(+), 1b(-) |
| Linearity | < В± 0.1 % of full-scale value |
| Rated current | 25 mA at 24 V (per channel) |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Degree of protection | IEC 60529 |
| Voltage range | 0/0.2 ... 1 V 0/1 ... 5 V 0/2 ... 10 V |
| Connection side | control side |
| Connection | SL1: 8a(+), 7a(-); 10a(+), 9a(-) |
| Certificate | PF 11 CERT 2109 X , observe statement of conformity |
| Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
| Power dissipation | typ. 0.5 W (per channel) |
| Operating range | 3 ... 30 V , sink mode |
| Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) |
| Degree of protection | IP20 |
| Configuration | via DIP switches via potentiometer |
| Current range | 0/4 ... 20 mA , with field selectable DC offset suppression |
| Mounting | on Termination Board |
| Connection side | field side |
| Output compliance | 13 V (load 650 andOmega; at 20 mA) , source mode |
| Frequency range | communication channel: 0.5 ... 40 kHz within 3 db, (-6 db at 100 kHz), Tx to output and output to Tx, suitable for use with SMART transmitters using HART or similar protocol , not available with voltage input |
| Display elements | LED |
| Influence of temperature | < В± 0.01 %/K of full-scale value |
| Mass | approx. 140 g |
| Impedance | current input: 50 andOmega; (overcurrent protected) with field selectable 5 V level shift voltage input: 100 kandOmega;/Uin |
| Signal type | Analog input |
| Accuracy | 0.1 % of full-scale value (current output) |
| Current range | 0/4 ... 20 mA , (source or sink mode) |
| Voltage range | 0 ... 5 V/1 ... 5 V (on 250 andOmega; internal shunt) 0 ... 10 V/2 ... 10 V (on 500 andOmega; internal shunt) |
| Labeling | space for labeling at the front |
| Rated voltage | 20.4 ... 30 V DC bus powered via Termination Board |
Comments
No comments yet