Pepperl+Fuchs HiD2025
SMART Transmitter Power Supply
This item is out of production!
- 1-channel isolated barrier
- 24 V DC supply (bus powered)
- 2-wire SMART transmitter
- Output for 4 mA ... 20 mA or 1 V ... 5 V
- Low power dissipation
- Up to SIL 2 acc. to IEC 61508
Item Number:
HiD2025
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
This item is out of production!
Check with the manager for a replacement.
| Output signal | 4 ... 20 mA or 1 ... 5 V (on 250 andOmega;, 0.1 % internal shunt) |
| Certificate | PF 10 CERT 1609 X |
| Safety Integrity Level (SIL) | SIL 2 |
| Connection side | control side |
| Connection | SL2: 5a(+), 5b(-) |
| Linearity | < В± 0.1 % of full-scale value |
| Display elements | LED |
| Rated current | 50 mA at 24 V, 20 mA output |
| Signal type | Analog input |
| Control elements | DIP-switch |
| Labeling | space for labeling at the front |
| Ripple | 10 mV eff |
| Ripple | 10 mV eff on a load of 250 andOmega; |
| Input current | 4 ... 20 mA , current limit 26 mA typ. |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Load | 0 ... 650 andOmega; |
| Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) |
| Connection | SL1: 8a(+), 7a(-) |
| Degree of protection | IEC 60529:2001 |
| Degree of protection | IP20 |
| Configuration | via DIP switches |
| Influence of temperature | < 2 andmicro;A/K (0 ... 60 В°C (32 ... 140 В°F)); < 4 andmicro;A/K (-20 ... 0 В°C (-4 ... 32 В°F)) 0.01 %/ K |
| Power dissipation | 0.8 W at 24 V |
| Calibrated accuracy | < В± 0.1 % of full-scale value (current output) |
| Mounting | on Termination Board |
| Voltage | min. 15.5 V at 20 mA |
| IECEx approval | IECEx CES 10.0011 |
| EU-Type Examination Certificate | CESI 10 ATEX 025 |
| Influence of load | < 0.1 % of full-scale value from 0 ... 650 andOmega; |
| Response time | 40 ms , 10 ... 90 % step change |
| Connection side | field side |
| Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
| Frequency range | communication channel: 0.5 ... 40 kHz within 3 db, (-6 db at 100 kHz), Tx to output and output to Tx, suitable for use with SMART transmitters using HART or similar protocol |
| Mass | approx. 140 g |
| Rated voltage | 20.4 ... 30 V DC bus powered via Termination Board |
| Electromagnetic compatibility | NE 21:2006 For further information see system description. |
Comments
No comments yet