Pepperl+Fuchs HiD2030SK SMART Transmitter Power Supply
Item Number: HiD2030SK
- 2-channel isolated barrier
- 24 V DC supply (bus powered)
- 2-wire SMART transmitters or current sources
- Usable as signal splitter (1 input and 2 outputs)
- Dual output 4 mA ... 20 mA, current sink
- Line fault detection (LFD)
- Up to SIL 2 acc. to IEC 61508
- Overview
- Datasheet
- Alternative numbers
- Comments
| Coding | pin 1 and 3 trimmed For further information see system description. |
| Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) |
| Connection | SL1: 8a(+), 7a(-); 10a(+), 9a(-) |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Output type | open collector transistor (common to both channels) fault bus signal, collective error message |
| Relative humidity | 5 ... 90 %, non-condensing up to 35 В°C (95 В°F) |
| Rated voltage | 20.4 ... 30 V DC bus powered via Termination Board |
| Connection side | field side |
| Calibrated accuracy | < В± 0.1 % of full-scale value |
| Communication | pass-through of HART signal to safe area The current sink terminals 4, 7 and 5, 6 do not pass the HART signal to safe area. |
| Frequency range | communication channel: 0.5 ... 40 kHz within 3 db, (-6 db at 100 kHz), Tx to output and output to Tx, suitable for use with SMART transmitters using HART or similar protocol |
| Display elements | LEDs |
| Degree of protection | IP20 |
| Mass | approx. 140 g |
| Signal level | no fault: 1 mA ... 23.5 mA input current fault detection: < 0.2 mA or > 24 mA input current |
| Output/Output | functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff |
| Electromagnetic compatibility | NE 21:2006 For further information see system description. |
| Input current | 4 ... 20 mA , current limit 26 mA |
| EU-type examination certificate | CESI 02 ATEX 086 |
| Output | sink mode from external supply |
| Rated current | 40 mA at 24 V, 20 mA output (per channel) |
| Signal type | Analog input |
| Safety Integrity Level (SIL) | SIL 2 |
| Connection | SL1: 6b |
| Influence of temperature | < В± 0.01 %/ K |
| Labeling | space for labeling at the front |
| Ripple | 10 mV eff |
| Degree of protection | IEC 60529 |
| Output/power supply | functional insulation acc. to DIN EN 50178, rated insulation voltage 50 Veff |
| IECEx approval | IECEx TUN 04.0012 |
| Connection | SL2: 5a(+), 5b, 7a(-); 1a(+), 1b, 3b(-) |
| Connection side | control side |
| Linearity | < В± 0.05 % of full-scale value |
| Output signal | 4 ... 20 mA , current limit 24 mA |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Mounting | on Termination Board |
| Voltage | working voltage 7 ... 30 V |
| Power dissipation | 1.05 W at 20 mA and 24 V external from PCS or PLC (per channel) |
| Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
| Input resistance | 40 Ω , for current source |
| Certificate | PF 11 CERT 2109 X |
| Voltage | min. 15.5 V at 20 mA |
| Response time | 70 ms , 10 ... 90 % step change |
Comments
No comments yet