Pepperl+Fuchs HiD2037
SMART Current Driver
This item is out of production!
- 1-channel isolated barrier
- 24 V DC supply (bus powered)
- Current output up to 750 Omega- load
- SMART I/P and valve positioners
- Line fault detection (LFD)
- Up to SIL 2 acc. to IEC 61508
Item Number:
HiD2037
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
This item is out of production!
Check with the manager for a replacement.
| Ripple | 15 mV eff |
| Influence of temperature | < В± 0.01 %/K |
| Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
| Electromagnetic compatibility | NE 21:2006 For further information see system description. |
| Influence of load | < В± 0.1 % of full-scale value from 0 ... 750 andOmega; |
| Input current | 4 ... 20 mA , reverse polarity protected |
| Connection | SL1: 6b |
| EU-Type Examination Certificate | CESI 02 ATEX 086 |
| Safety Integrity Level (SIL) | SIL 2 |
| Response time | 50 ms , 10 ... 90 % step change |
| IECEx approval | IECEx TUN 04.0012 |
| Degree of protection | IEC 60529 |
| Signal type | Analog output |
| Output type | open collector transistor (internal fault bus) |
| Accuracy | < В± 0.1 % of full-scale value |
| Mass | approx. 140 g |
| Linearity | < В± 0.1 % of full-scale value |
| Connection side | control side |
| Frequency range | 0.5 ... 40 kHz within 3 db, (-6 db at 100 kHz) for use with SMART positioners using HART protocol |
| Load | 0 ... 750 andOmega; |
| Rated voltage | 20.4 ... 30 V DC bus powered via Termination Board |
| Rated current | 40 mA at 24 V, 20 mA output |
| Degree of protection | IP20 |
| Signal level | input voltage drop < 4 V with field wiring intact input current < 1.2 mA with field wiring open |
| Output signal | 4 ... 20 mA |
| Display elements | LEDs |
| Connection side | field side |
| Power dissipation | 0.85 W at 24 V |
| Connection | SL1: 8a(+), 7a(-) |
| Connection | SL2: 5a(+), 5b(-) |
| Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Certificate | PF 11 CERT 2109 X |
| Mounting | on Termination Board |
| Line fault detection | breakage, load > 100 kandOmega;, short-circuit, load < 70 andOmega; |
| Labeling | space for labeling at the front |
Comments
No comments yet