Pepperl+Fuchs HiD2072
Temperature Converter
This item is out of production!
- 2-channel isolated barrier
- 24 V DC supply (bus powered)
- 2-, 3-, and 4-wire RTDs or potentiometer
- Linearized output 4 mA ... 20 mA
- Sensor breakage detection
- Simple span and zero selection
Item Number:
HiD2072
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
This item is out of production!
Check with the manager for a replacement.
| Mass | approx. 140 g |
| Signal type | Analog input |
| Influence of temperature | < В± 0.01 %/K on zero and span |
| Connection side | control side |
| Display elements | LED |
| Mounting | on Termination Board |
| Output signal | 4 ... 20 mA or 1 ... 5 V (on 250 andOmega;, 0.1 % internal shunt) Output signal is linear with temperature for Pt100. |
| Linearity | < В± 0.1 % of full-scale value (terminal based В°C or В°F input to mA out for Pt100) |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Labeling | space for labeling at the front |
| Accuracy | < В± 0.1 % of full-scale value (current output) |
| Power dissipation | 0.6 W at 24 V (per channel) |
| Ripple | 10 mVrms (at load 250 andOmega;) |
| Rise time/fall time | typ. 150 ms |
| Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
| Connection | SL2: 7a(+), 5a(-), 5b(+), 7b(-); 3a(+), 1a(-), 1b(+), 3b(-) |
| Certificate | PF 11 CERT 2109 X |
| Connection side | field side |
| Electromagnetic compatibility | NE 21:2006 For further information see system description. |
| Connection | SL1: 8a(+), 7a(-); 10a(+), 9a(-) |
| Load | 0 ... 650 andOmega; |
| Potentiometer | 3-wire |
| Control elements | DIP-switch potentiometer |
| Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) |
| Rated current | 30 mA at 24 V, 20 mA output (per channel) |
| Line fault detection | sensor burnout, upscale or downscale (selectable) (not on potentiometer and 4-wire RTD) |
| RTD | 2-, 3- or 4-wire Pt100 acc. to DIN 43760 |
| Degree of protection | IP20 |
| IECEx approval | IECEx TUN 04.0012 |
| Degree of protection | IEC 60529 |
| Configuration | via DIP switches via potentiometer |
| EU-Type Examination Certificate | CESI 02 ATEX 086 |
| Influence of load | < В± 0.1 % of full-scale value from 0 ... 650 andOmega; |
| Rated voltage | 20.4 ... 30 V DC bus powered via Termination Board |
Comments
No comments yet