Pepperl+Fuchs HiD2872
Solenoid Driver
This item is out of production!
- 2-channel isolated barrier
- 24 V DC supply (bus or loop powered)
- Output 40 mA at 12 V DC, 55 mA current limit
- Contact or logic control input
- Entity parameter Io/Isc = 110 mA
- Line fault detection (LFD)
- Up to SIL 2 acc. to IEC 61508 (bus powered)
- Up to SIL 3 acc. to IEC 61508 (loop powered)
Item Number:
HiD2872
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
This item is out of production!
Check with the manager for a replacement.
Control elements | DIP-switch |
Fault level | lead short-circuit detection at < 25 andOmega; lead breakage detection at > 100 kandOmega; typical |
Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) |
Fault current | 4 mA pulsing (20 ms ON, 200 ms OFF) |
Inrush current | 0.2 A , 15 ms loop powered |
Current limit | 55 mA |
Labeling | space for labeling at the front |
Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
Connection | SL1: 6b |
Signal level | 1-signal: 15...30 V DC (current limited at 3 mA) or contact close (internal 10 kandOmega; pull-up) 0-signal: 0...5 V DC or contact open |
Mounting | on Termination Board |
IECEx approval | IECEx CES 10.0013 |
Display elements | LEDs |
Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
Connection side | field side |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Energized/De-energized delay | - bus powered: filter OFF: 1 ms, filter ON: 10 ms - loop powered: switch-on 50 ms, switch-off 6 ms (300 andOmega; load) |
Connection | SL2: 5a(+), 5b(-), 7a(+); 1a(+), 1b(-), 3b(+) |
Connection side | control side |
Certificate | PF 10 CERT 1729 X |
Coding | pin 1 and 4 trimmed For further information see system description. |
Output/power supply, inputs, and collective error | safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V |
Power dissipation | 1 W at 24 V, 300 andOmega; load (per channel) |
Load | nominal 0.1 ... 5 kandOmega; |
Control input | external switch (dry contact or open collector) non isolated or logic signal input fully floating |
Output/Output | safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 60 V |
Internal resistor | approx. 240 andOmega; |
Connection | SL1: 8a(+), 7a(-); 10a(+), 9a(-) bus powered SL1: 8b(+), 7b(-); 9b(+), 10b(-) loop powered |
Open loop voltage | approx. 22.5 V |
Relative humidity | 5 ... 90 %, non-condensing up to 35 В°C (95 В°F) |
Safety Integrity Level (SIL) | SIL 3 |
Rated voltage | 20.4 ... 30 V DC loop powered 20.4 ... 30 V DC bus powered via Termination Board |
Output type | open collector transistor (internal fault bus) |
Degree of protection | IP20 |
Signal type | Digital Output |
Switching frequency | - bus powered: filter OFF: max. 150 Hz, filter ON: max. 15 Hz - loop powered: max. 10 Hz |
Mass | approx. 140 g |
EU-Type Examination Certificate | CESI 10 ATEX 036 |
Degree of protection | IEC 60529:2001 |
Voltage | 12 V |
Configuration | via DIP switches |
Electromagnetic compatibility | NE 21:2006 For further information see system description. |
Input current | 62 mA at 24 V, 300 andOmega; load (per channel) |
Current | 40 mA |
Power dissipation | 1 W at 24 V, 300 andOmega; load (per channel) for loop powered |
People also buy
Comments
No comments yet