Pepperl+Fuchs HiD2876
Solenoid Driver

Pepperl+Fuchs HiD2876

This item is out of production!

  • 2-channel isolated barrier
  • 24 V DC supply (bus or loop powered)
  • Output 40 mA at 11.2 V DC, 55 mA current limit
  • Contact or logic control input
  • Entity parameter Io/Isc = 93 mA
  • Line fault detection (LFD)
  • Up to SIL 2 acc. to IEC 61508 (bus powered)
  • Up to SIL 3 acc. to IEC 61508 (loop powered)
Item Number: HiD2876
442.98
-
+
Total price: 442.98
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments

This item is out of production!

Check with the manager for a replacement.

Signal level1-signal: 15...30 V DC (current limited at 3 mA) or contact close (internal 10 kandOmega; pull-up)
0-signal: 0...5 V DC or contact open
Open loop voltageapprox. 22.5 V
CertificatePF 10 CERT 1729 X
Power dissipation1 W at 24 V, 300 andOmega; load (per channel) for loop powered
Fault current4 mA pulsing (20 ms ON, 200 ms OFF)
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
ConnectionSL1: 1a(-), 1b(-); 2a(+), 2b(+)
Switching frequency- bus powered: filter OFF: max. 150 Hz, filter ON: max. 15 Hz
- loop powered: max. 10 Hz
Mountingon Termination Board
Codingpin 1 and 3 trimmed
For further information see system description.
EU-Type Examination CertificateCESI 10 ATEX 036
ConnectionSL1: 6b
ConnectionSL2: 5a(+), 5b(-), 7a(+); 1a(+), 1b(-), 3b(+)
Output/Outputsafe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 60 V
Safety Integrity Level (SIL)SIL 3
Degree of protectionIP20
Internal resistorapprox. 280 andOmega;
Output typeopen collector transistor (internal fault bus)
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Energized/De-energized delay- bus powered: filter OFF: 1 ms, filter ON: 10 ms
- loop powered: switch-on 50 ms, switch-off 6 ms (300 andOmega; load)
Massapprox. 140 g
Fault levellead short-circuit detection at < 25 andOmega;
lead breakage detection at > 100 kandOmega; typical
Display elementsLEDs
Current 40 mA
Control elementsDIP-switch
Configurationvia DIP switches
Dimensions18 x 106 x 128 mm (0.7 x 4.2 x 5 inch)
Labelingspace for labeling at the front
ConnectionSL1: 8a(+), 7a(-); 10a(+), 9a(-) bus powered
SL1: 8b(+), 7b(-); 9b(+), 10b(-) loop powered
Connection sidecontrol side
Voltage 11.2 V
Rated voltage20.4 ... 30 V DC loop powered
20.4 ... 30 V DC bus powered via Termination Board
Degree of protectionIEC 60529:2001
Input current62 mA at 24 V, 300 andOmega; load (per channel)
IECEx approvalIECEx CES 10.0013
Loadnominal 0.1 ... 5 kandOmega;
Connection sidefield side
Signal typeDigital Output
Output/power supply, inputs, and collective errorsafe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V
Electromagnetic compatibilityNE 21:2006
For further information see system description.
Current limit55 mA
Relative humidity5 ... 90 %, non-condensing up to 35 В°C (95 В°F)
Control inputexternal switch (dry contact or open collector) non isolated or logic signal input fully floating
Inrush current0.2 A , 15 ms loop powered
Power dissipation1 W at 24 V, 300 andOmega; load (per channel)

Comments

No comments yet

Write a comment