Pepperl+Fuchs HiD2881

Solenoid Driver
Pepperl+Fuchs HiD2881
Price on Request
One click request

Product is phased out and cannot be ordered!!!


IECEx approvalIECEx TUN 04.0012

Current limit65 mA
ConnectionSL1: 8a(+), 7a(-); 8b(+), 7b(-)
Rated voltage20.4 ... 30 V DC loop powered
20.4 ... 30 V DC bus powered via Termination Board
Response timeturn-on time 2 ms, turn-off time 8 ms, at 300 andOmega; load
Signal typeDigital Output
Safety Integrity Level (SIL)SIL 3
Configurationvia DIP switches
Connection sidecontrol side
Fault current4 mA typical
Voltage13 V
Operating modeoutput on with contact close or transistor on or logic level > 4 V
output off with contact open or transistor off or logic level < 1.5 V
Dimensions18 x 106 x 128 mm (0.7 x 4.2 x 5 inch)
Connection sidefield side
Fault levellead short-circuit detection at < 25 andOmega;
lead breakage detection at > 100 kandOmega; typical
Degree of protectionIP20
Current60 mA
Control inputexternal switch (dry contact or open collector) non isolated or logic signal input fully floating
CertificatePF 11 CERT 2109 X
Degree of protectionIEC 60529
Control elementsDIP-switch
ConnectionSL2: 5a(+), 5b(-)
ConnectionSL1: 1a(-), 1b(-); 2a(+), 2b(+)
Mountingon Termination Board
Display elementsLEDs
Switching frequencymax. 50 Hz
Input current80 mA at 24 V, 300 andOmega; load
Labelingspace for labeling at the front
Power dissipation1.3 W at 24 V, 300 andOmega; load
Massapprox. 140 g
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Loadnominal 0.1 ... 5 kandOmega;
Inrush current1 A , max. 2 ms, loop powered
Electromagnetic compatibilityNE 21:2006
For further information see system description.
ConnectionSL1: 6b
SL1: 10a(+), 9a(-)
Output typeSL1: 6b
open collector transistor (internal fault bus)
SL1: 10a(+), 9a(-)
optocoupled transistor (rating 30 V, max. 50 mA)
EU-Type Examination CertificateCESI 02 ATEX 086
in international format without spaces
All fields are required