Pepperl+Fuchs IC-KP2-1HB17-2V1D
Control interface unit
- LED status indicator of bus communication and read/write head
- Network loop through by means of integrated 2 port switch
- Overview
- Comments
Diagnostic Coverage (DC)0 %
| Ripple | 10 % at 30 V DC |
| LED CH1 | green: read head detected red: Configuration error |
| Transfer rate | 10 MBit/s or 100 MBit/s |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Transfer rate | 10 MBit/s or 100 MBit/s |
| Climatic conditions | air humidity max. 96 % Salt spray resistant to EN 60068-2-52 |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| LED Link/Traffic | green: network connection yellow: flashes in rhythm with the transmitted data |
| Connection | Read/write heads: shielded, 4-pin, M12 connector Power supply: M12 connector Protective earth: M4 earthing screw Ethernet: M12 plug connection |
| Shock and impact resistance | Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6 Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27 |
| Degree of protection | IP67 |
| Degree of protection | IEC 60529:2001 |
| Physical | Ethernet |
| Power consumption | 3.5 W Without read/write heads |
| Protocol | SMTP HTTP TCP/IP (Port 10000) MODBUS/TCP EtherNet/IP PROFINET IO |
| Mass | approx. 300 g |
| UL File Number | E87056 |
| LED 1 | Status indicator for read/write head green: command at read/write head active yellow: approx. 1 second long, if command was successfully executed |
| LED PWR/ERR | green: power on yellow: system is starting red: PROFINET bus failure |
| Current consumption | 2 A incl. read/write head |
| Rotary switch | Address setting |
| Number of read/write heads | max. 1 |
| Rated operating voltage | 20 ... 30 V DC , PELV |
| MTTFd | 140 a |
| Installation | screw fixing |
| Physical | Ethernet |
| Mission Time (TM) | 10 a |
| Galvanic isolation | basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff |
| Protocol | SMTP HTTP TCP/IP (Port 10000) MODBUS/TCP EtherNet/IP PROFINET IO |
Comments
No comments yet