Pepperl+Fuchs IC-KP2-1HRX-2V1
Control interface unit
- LED status indicator of bus communication and read/write head
- Overview
- Comments
| Rated operating voltage | 20 ... 30 V DC , PELV |
| LED RxD | green: flashes in rhythm of receiving data |
| Ripple | 10 % at 30 V DC |
| LED CH1 | green: read head detected red: Configuration error |
| MTTFd | 160 a |
| LED 1 | Status indicator for read/write head green: command at read/write head active yellow: approx. 1 second long, if command was successfully executed |
| Degree of protection | IP67 |
| Interface type | serial |
| UL File Number | E87056 |
| Diagnostic Coverage (DC) | 0 % |
| Connection | read/write head: M12 plug connection, 4-pin, screened, Power supply: M12 connector Protective earth: M4 earthing screw RS 232: M12 plug connection RS 485: M12 connector |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Physical | RS-485 |
| Physical | RS 232 |
| Climatic conditions | air humidity max. 96 % Salt spray resistant to EN 60068-2-52 |
| Mass | approx. 300 g |
| Protocol | ASCII |
| Galvanic isolation | basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff |
| LED TxD | green: flashes in rhythm with the transmitted data |
| Shock and impact resistance | Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6 Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27 |
| LED PWR/ERR | green: power on red: Hardware fault |
| Interface type | serial |
| Degree of protection | IEC 60529:2001 |
| Transfer rate | 1200; 2400; 4800; 9600; 19200; 38400 Bit/s |
| Number of read/write heads | max. 1 |
| Mission Time (TM) | 10 a |
| Installation | screw fixing |
| Protocol | ASCII |
| Transfer rate | 1200; 2400; 4800; 9600; 19200; 38400 Bit/s |
| Power consumption | 2 W Without read/write head |
| Current consumption | 4 A incl. read/write heads |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Comments
No comments yet