Pepperl+Fuchs IC-KP2-2HB6-V15B
Control interface unit

Pepperl+Fuchs IC-KP2-2HB6-V15B
  • LED status indicator of bus communication and read/write heads
  • Max. 2 read/write heads can be connected
  • Alternatively 1 read/write head and 1 trigger sensor can be connected
Item Number: IC-KP2-2HB6-V15B
Price on Request
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Comments
Massapprox. 300 g
Installationscrew fixing
ProtocolASCII
Transfer rate38.4 kBit/s
Number of read/write headsmax. 2
alternatively 1 read/write head and 1 trigger sensor
LED DiagNo function
Current consumption 4 A incl. read/write heads
Rotary switchAddress setting 00 ... 7E, FF (hexadecimal)
BUS Address (high nibble): 0 ... 7, F
BUS Address (low nibble): 0 ... F
Interface typeDiagnostic Interface
Power consumption2 W Without read/write heads
LED PWR/ERRgreen: power on
red: Hardware fault
Degree of protectionIEC 60529:2001
ProtocolPROFIBUS DP acc. to EN 50170
UL File NumberE87056
Ripple 10 % at 30 V DC
Shock and impact resistanceOscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6
Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27
ConnectionRead/write heads: shielded, 4-pin, M12 connector
Power supply: M12 connector
Protective earth: M4 earthing screw
Diagnostic RS 232: M12 connector
PROFIBUS: M12 connector, B-coded
Transfer rate9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s
3; 6; 12 Mbit/s self-synchronizing
LEDs 1, 2Status indicator for read/write heads
green: command at read/write head active
yellow: approx. 1 second long, if command was successfully executed
Rated operating voltage20 ... 30 V DC , PELV
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
LEDs CH1, CH2green: read head detected
red: Configuration error
Degree of protectionIP67
Physical RS-485
Galvanic isolationbasic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff
LED BUSgreen: Slave is at state ""Data Exchange""
red: Bus error
Interface typePROFIBUS
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Physical RS 232
Climatic conditionsair humidity max. 96 %
Salt spray resistant to EN 60068-2-52

Comments

No comments yet

Write a comment