Pepperl+Fuchs ICA-16DIO-G60AL-IO
I/O hub
- Sturdy metallic housing
- IO-link interface for service and process data
- 16 digital inputs/outputs can be configured
- Logic level can be configured per port
- Filter time can be configured per port
- Pulse extension can be configured per port
- Overview
- Comments
| IO-Link Revision | 1.1 |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Connection | Power supply/IO-Link M12, A-coded Inputs/Outputs M12, A-coded |
| Current consumption | typ. 80 mA |
| Rated operating voltage | 18 ... 30 V |
| Vibration resistance | 15 g / 5 ... 500 Hz |
| Degree of protection | EN 60529:2000 |
| Mass | 400 g |
| LED UAUX | Green: Actuator supply voltage OK Red: Actuator supply voltage < 18 V |
| Emitted interference | EN 61000-6-2:2005 |
| LED B | White: status indicator channel B Red: peripheral error |
| Pollution degree | 3 |
| Process data width | Input 4 Byte Output 4 Byte |
| Compatible master port type | A |
| LED US | Green: system/sensor supply voltage OK Red: system/sensor supply voltage < 18 V Flashing red: sensor supply voltage overload |
| Device profile | Identification and Diagnosis |
| Sensor supply | max. 500 mA Per port (X1 - X8) |
| UL File Number | E223772 |
| Degree of protection | IP65/IP67/IP69K |
| Noise immunity | EN 61000-6-4:2007+A1:2011 |
| Nominal voltage | 24 V DC |
| Construction type | Field housing |
| Min. cycle time | 2 ms |
| LED IO-Link | Green: module is switched on, no communication Flashing green: communication OK Red: signal line overload |
| Output rated operating current | max. 2 A per channel (X1 - X8) / 4 A Per port max. 9 A per module |
| Number/Type | 16 digital inputs/outputs, configurable Inputs: 2-, 3-, 4-wire PNP, DC, supply from US Outputs: 2-wire PNP, DC, supply from UL No galvanic isolation between US and UL short-circuit protected |
| Fieldbus standard | Type 1 according to IEC 61131-2 |
| Transfer rate | COM 3 (230.4 kBaud) |
| Relative humidity | max. 95 % |
| Nominal current | 16 A |
| Device ID | 0x0F0203 (983555) |
| Interface type | IO-Link |
| MTTFd | 2111 a |
| SIO mode support | no |
| Current loading capacity | max. 16 A per module (for UL applications, max. 9 A) |
| Shock and impact resistance | 50 g, 11 ms, all axes |
| Altitude | 0 ... 2000 m |
| LED A | Orange: status indicator channel A Red: peripheral error |
| Ambient temperature | -20 ... 70 В°C (-4 ... 158 В°F) |
Comments
No comments yet