Pepperl+Fuchs ICDM-RX/EN-DB9/RJ45-PM
EtherNet/IP Gateway
- Panel mounting and DB9 serial connector
- EtherNet/IP to serial and Ethernet TCP/IP raw/ASCII devices.
- RS-232/422/485 software selectable interfaces
- Web-based configuration
- Overview
- Comments
| Electrical safety | CSA C22.2 No. 60950 / CSA C22.2 No. 60950/UL60950 |
| Ambient temperature | -40 ... 75 В°C (-40 ... 167 В°F) |
| Noise immunity | EN 61000-6-2 , EN 55024 |
| LED indication | see manual |
| Physical | 1 x DB9 |
| Altitude | 0 ... 3048 m |
| Mounting | panel mount |
| Additional protocols | ARP, BOOTP, DHCP/RARP, HTTP, HTTPS, SSH, SSL/TLS, ICMP, RFC 1006 (ISO over TCP), SNMP (MIB-II), TCP/IP & UDP socket services, Telnet, and TFTP, and supports IP multicast data transmission |
| Emitted interference | AS/NZS EN 55022, FCC Part 15 Subpart B, ICES-003, CISPR 22 |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Interface type | Industrial Ethernet |
| UL File Number | E185802 |
| Nominal voltage | 24 V DC |
| Transfer rate | 10/100 Mbps |
| Interface type | Software selectable interfaces: RS-232 , RS-422 , RS-485 (2 and 4-wire) |
| Relative humidity | max. 95 % |
| Rated operating voltage | 5 ... 30 V DC |
| Protocol | Raw serial |
| Construction type | Cabinet module |
| Protocol | EtherNet/IP |
| Supported baud rates | 300 bps to 230Kbps |
| Mass | 220g |
| Connection | Power Supply: pluggable screw terminal Fieldbus: 1 x RJ45 Inputs/outputs: 1 x DB9 |
| Physical | 1 x RJ45 |
Comments
No comments yet