Pepperl+Fuchs ICDM-RX/EN1-2ST/RJ45-DIN EtherNet/IP to Modbus Gateway

Pepperl+Fuchs ICDM-RX/EN1-2ST/RJ45-DIN
Item Number: ICDM-RX/EN1-2ST/RJ45-DIN
  • DIN-rail mounting and screw terminal connectors
  • EtherNet/IP to Modbus, Modbus to EtherNet/IP, and Modbus to Modbus communications
  • Advanced Modbus gateway and routing capabilities
  • Data Mapping sub-system and a built-in Modbus concentrator
  • Web-based configuration
  • RS-232/422/485 software selectable interfaces
  • NEMA TS2 Certified
568.40
Quantity
-
+
Total price: 568.40
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Interface typeSoftware selectable interfaces: RS-232 , RS-422 , RS-485 (2 and 4-wire)
Rated operating voltage5 ... 30 V DC
Additional protocolsARP, BOOTP, DHCP/RARP, HTTP, HTTPS, SSH, SSL/TLS, ICMP, RFC 1006 (ISO over TCP), SNMP (MIB-II), TCP/IP & UDP socket services, Telnet, and TFTP, and supports IP multicast data transmission
Emitted interferenceEN 61000-6-4, EN 55032, FCC Part 15 Subpart B, ICES-003, AS/NZS CISPR 32.
Degree of protectionNEMA TS2
ProtocolMODBUS
ConnectionPower Supply: screw terminals
Fieldbus: 1 x RJ45
Inputs/outputs: 2 x Screw Terminal
ProtocolEtherNet/IP
Mass130.4g
Noise immunityEN 61000-6-2 , EN 55024
Electrical safetyCSA C22.2 No. 60950 / UL60950
Physical 2 x Screw Terminal
MountingDIN mounting rail
Relative humiditymax. 95 %
Altitude0 ... 3048 m
UL File NumberE185802
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Physical 1 x RJ45
Construction typeCabinet module
Supported baud rates300 bps to 230Kbps
LED indicationsee manual
Nominal voltage24 V DC
Ambient temperature-40 ... 75 В°C (-40 ... 167 В°F)
Transfer rate10/100 Mbps
Interface typeIndustrial Ethernet

Comments

No comments yet

Write a comment