Pepperl+Fuchs ICDM-RX/TCP-ST/RJ45-DIN
Serial Device Server

Pepperl+Fuchs ICDM-RX/TCP-ST/RJ45-DIN
  • Web-based configuration
  • DIN-rail mounting and screw terminal connections
  • RS-232/422/485 software selectable interfaces
  • NEMA TS2 Certified
  • TCP/IP & UDP Socket Services
  • Device drivers (Windows and Linux)
Item Number: ICDM-RX/TCP-ST/RJ45-DIN
Price on Request
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Comments
MountingDIN mounting rail
Ambient temperature-40 ... 75 В°C (-40 ... 167 В°F)
Nominal voltage24 V DC
LED indicationsee manual
Additional protocolsARP, BOOTP, DHCP/RARP, HTTP, HTTPS, SSH, SSL/TLS, ICMP, RFC 1006 (ISO over TCP), SNMP (MIB-II), TCP/IP & UDP socket services, Telnet, and TFTP, and supports IP multicast data transmission
Electrical safetyCSA C22.2 No. 61010-1-12 / CSA C22.2 No. 61010-1-201
UL 61010-1 / UL 61010-1-201
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Transfer rate10/100 Mbps
Relative humiditymax. 95 %
Physical 1 x RJ45
UL File NumberE360395
Rated operating voltage5 ... 30 V DC
Supported baud rates300 bps to 230Kbps
ProtocolTCP/IP
Degree of protectionNEMA TS2
Mass113.4g
ConnectionPower Supply: screw terminals
Fieldbus: 1 x RJ45
Inputs/outputs: 9-pin screw terminal block
Construction typeCabinet module
Interface typeIndustrial Ethernet
ProtocolRaw serial
Physical 1 x screw terminal
Interface typeSoftware selectable interfaces: RS-232 , RS-422 , RS-485 (2 and 4-wire)
Noise immunityEN 61000-6-2 , EN 55024
Emitted interferenceEN 61000-6-4, EN 55032, FCC Part 15 Subpart B, ICES-003, AS/NZS CISPR 32
Altitude0 ... 3048 m

Comments

No comments yet

Write a comment