Pepperl+Fuchs IQT1-FP-IO-V1
Read/write station
- Operating frequency 13.56 MHz
- IO-link interface
- Conforms to ISO 15693
- Suitable for FRAM transponder
- LEDs as function indicators
- Connection via V1 (M12 x 1) plug connection
- Degree of protection IP67
- For connection to IO-Link master
- Overview
- Comments
| Radio approval | USA: FCC IREIQT1FPIO Canada: 7037A-IQT1FPIO |
| LED red/green | Green: power on Flashing green: IO-Link communication Flashing red/green: IO-Link communication interrupted |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| IC approval | This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prГ©sent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisГ©e aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioГ©lectrique subi, mГЄme si le brouillage est susceptible d'en compromettre le fonctionnement. |
| Protocol | IO-Link V1.1 |
| Rated operating voltage | 20 ... 30 V DC , ripple 10 %SS |
| LED blue/yellow | Blue: Write/read attempt performed Yellow: Read/write tag detected |
| RFID | ISO/IEC 15693-2:2006 ISO/IEC 15693-3:2009 ISO/IEC 18000-3:2010 |
| UL File Number | E87056 |
| Mass | approx. 380 g |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Cycle time | min. 4 ms |
| Degree of protection | EN 60529:2000 |
| SIO mode support | no |
| Power consumption | 2 W |
| Degree of protection | IP67 |
| MTTFd | 680 a |
| Diagnostic Coverage (DC) | 0 % |
| FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
| Mission Time (TM) | 10 a |
| Transfer rate | 26 kBit/s |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| Interface type | IO-Link |
| Process data witdh | 32 Byte |
| Mode | COM 3 (230.4 kBaud) |
| Connection | M12 x 1 connector |
| Operating frequency | 13.56 MHz |
Comments
No comments yet