Pepperl+Fuchs KCD0-RSH-1.1D.1
Relay Module
- 1-channel signal conditioner
- 24 V DC supply (loop powered)
- Logic input 19 V DC ... 26.5 V DC, non-polarized
- Relay contact output for de-energized to safe function
- Test pulse immunity
- Up to SIL 3 acc. to IEC 61508
- Up to PL e acc. to EN/ISO 13849
Item Number:
KCD0-RSH-1.1D.1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Rated voltage | 19 ... 30 V DC loop powered |
| Mechanical life | 5 x 106 switching cycles |
| Connection | terminals 1, 2 |
| Contact loading | 253 V AC/3 A/cos φ 0.7; 30 V DC/3 A resistive load 253 V AC / 1/8 HP |
| Rated current | 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 36 mA (minimum load current DO card) |
| Connection side | field side |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Connection side | control side |
| Mass | approx. 100 g |
| Minimum switch current | 10 mA / 24 V DC |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) Observe the temperature range limited by derating, see section derating. |
| Test input | see Functional Safety Manual |
| Safety Integrity Level (SIL) | SIL 3 |
| Certificate | PF 15 CERT 3932 X |
| Electromagnetic compatibility | NE 21:2012 , EN 61326-3-1:2008 , EN 61326-3-2:2008 |
| Pulse/Pause ratio | 150 ms / 150 ms |
| Signal type | Digital Output |
| Energized/De-energized delay | 150 ms / 150 ms |
| Power consumption | < 1.3 W |
| Labeling | space for labeling at the front |
| Test pulse length | max. 4 ms from DO card |
| Connection | loop powered |
| Connection | screw terminals |
| UL approval | E106378 |
| Signal level | 0-signal: -5 ... 5 V 1-signal: 19 ... 26.5 V |
| Degree of protection | IEC 60529:2013 |
| Dimensions | 12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2 |
| Power dissipation | < 1.3 W |
| Connection | Input terminals 5, 6 ; test input terminals 7, 8, 9, 10 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Performance level (PL) | PL e |
| Display elements | LEDs |
| Degree of protection | IP20 |
| Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Switching frequency | < 3 Hz |
Comments
No comments yet