Pepperl+Fuchs KCD0-SD-Ex1.1245.SP Solenoid Driver
Item Number: KCD0-SD-Ex1.1245.SP
- 1-channel isolated barrier
- 24 V DC supply (loop powered)
- Current limit 45 mA at 12 V DC
- Housing width 12.5 mm
- Connection via spring terminals with push-in connection technology
- Up to SIL 3 acc. to IEC 61508
- Overview
- Datasheet
- Alternative numbers
- Comments
| Power dissipation | < 1 W |
| Output rated operating current | 45 mA |
| Inrush current | ≤ 200 mA after 100 µs |
| Safety Integrity Level (SIL) | SIL 3 |
| Internal resistor | max. 238 Ω |
| Signal type | Digital Output |
| Dimensions | 12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2 |
| Electromagnetic compatibility | NE 21 |
| Display elements | LED |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Certificate | PF 06 CERT 0971 X |
| Connection | terminals 5, 6 |
| Mass | approx. 100 g |
| Rated voltage | 19 ... 30 V DC |
| Open loop voltage | min. 22.7 V |
| Energized/De-energized delay | single operation: typ. 1.7 ms/50 µs; periodical: typ. 5 µs/50 µs |
| Connection | terminals 1+, 2- |
| Current | ≤ 45 mA |
| Connection side | field side |
| Rated voltage | loop powered |
| Degree of protection | IP20 |
| Connection | screw terminals |
| Connection side | control side |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Degree of protection | IEC 60529 |
| Protection against electrical shock | UL 61010-1 |
| Current | ≤ 72 mA at Ui = 19 V, ≤ 50 mA at Ui = 30 V with 265 Ω output load ≤ 45 mA at Ui = 19 V, ≤ 31 mA at Ui = 30 V with shorted output ≤ 14 mA at Ui = 19 V, ≤ 11 mA at Ui = 30 V no load at output |
| Input/Output | reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff |
| Labeling | space for labeling at the front |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| IECEx approval | IECEx BAS 06.0032 |
| EU-type examination certificate | BASEEFA 06 ATEX 0170 |
| Voltage | ≥ 12 V |
| Output signal | These values are valid for the rated operating voltage 19 ... 30 V DC. |
Comments
No comments yet