Pepperl+Fuchs KCD0-SD3-Ex1.1245
Solenoid Driver
- 1-channel isolated barrier
- 24 V DC supply (loop powered)
- Current limit 45 mA at 12 V DC
- Test pulse immunity
- Housing width 12.5 mm
- Up to SIL 3 acc. to IEC 61508
Item Number:
KCD0-SD3-Ex1.1245
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Switching frequency | max. 10 Hz |
| Safety Integrity Level (SIL) | SIL 3 |
| Voltage | 12 V |
| Signal level | 1-signal: 19 ... 30 V DC 0-signal: 0 ... 5 V DC |
| Output/other circuits | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Degree of protection | IP20 |
| Connection | terminals 1+, 2- |
| Energized/De-energized delay | 28 ms / 10 ms |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Rated voltage | 19 ... 30 V DC loop powered |
| Degree of protection | IEC 60529:2013 |
| Signal type | Digital Output |
| Ambient temperature | -20 ... 70 В°C (-4 ... 158 В°F) |
| Labeling | space for labeling at the front |
| Power dissipation | < 1.3 W |
| Test pulse length | max. 2 ms from DO card |
| Connection side | control side |
| Display elements | LED |
| Open loop voltage | typ. 24.6 V |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Mass | approx. 150 g |
| Internal resistor | approx. 240 andOmega; |
| Inrush current | 200 mA after 100 micro/s |
| Connection side | field side |
| Current limit | 45 mA |
| Protection against electrical shock | EN 61010-1:2010 |
| Dimensions | 12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2 |
| Rated voltage | 19 ... 30 V DC |
| Electromagnetic compatibility | NE 21:2012 , EN 61326-3-2:2008 For further information see system description. |
| Connection | loop powered |
| Current | typ. 45 mA |
| Connection | screw terminals |
| EU-Type Examination Certificate | EXA 17 ATEX 0002 X |
| Rated current | 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: 36 mA (minimum load current DO card) |
| Connection | terminals 5+, 6- |
Comments
No comments yet