Pepperl+Fuchs KCD2-SLD-Ex1.1245
Solenoid Driver

Pepperl+Fuchs KCD2-SLD-Ex1.1245
  • 1-channel isolated barrier
  • 24 V DC supply (bus or loop powered)
  • Output 45 mA at 12 V DC
  • Line fault transparency (LFT)
  • Test pulse immunity
  • Housing width 12.5 mm
  • Up to SIL 3 acc. to IEC 61508
Item Number: KCD2-SLD-Ex1.1245
368.96
-
+
Total price: 368.96
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Output II/power supplybasic insulation according to IEC/EN 61010-1, rated insulation voltage 32 Veff
Optional accessories- power feed module KFD2-EB2(.R4A.B)(.SP)
- universal power rail UPR-03(-M)(-S)
- profile rail K-DUCT-BU(-UPR-03)
Output/other circuitsbasic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Signal levelloop powered
1-signal: 19 ... 30 V DC
0-signal: 0 ... 5 V DC
bus powered
1-signal: 15 ... 30 V DC (current limited at 5 mA)
0-signal: 0 ... 5 V DC
Currenttyp. 45 mA
Internal resistor240 andOmega;
Test pulse lengthmax. 2 ms from DO card
Signal typeDigital Output
Current limit50 mA
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Display elementsLEDs
Loadnominal 0.05 ... 18 kandOmega;
Connectionterminals 1+, 2-
Connection sidecontrol side
Dimensions12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2
UL approvalE106378
Line fault detectionsignal at short-circuit RB < 25 andOmega;, lead breakage RB > 50 kandOmega; ; test current < 500 andmicro;A
Protection against electrical shockEN 61010-1:2010
Degree of protectionIP20
Massapprox. 150 g
Connection sidefield side
Power dissipation1.3 W at 24 V , 270 andOmega; load
Labelingspace for labeling at the front
Electromagnetic compatibilityNE 21:2012 , EN 61326-3-2:2008
For further information see system description.
Control elementsDIP-switch
Degree of protectionIEC 60529:2013
Rated current0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card)
1-signal: 36 mA (minimum load current DO card)
Output IIfault signal
Input current75 mA at 24 V , 270 andOmega; load
Inrush current< 200 mA , 10 ms loop powered
Connectionterminals 5+, 6-
Connectionterminals 5+, 6- loop powered
Power Rail or terminals 9+, 10- bus powered
EU-Type Examination CertificateEXA 17 ATEX 0002 X
Open loop voltagetyp. 24.6 V
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Configurationvia DIP switches
Connectionscrew terminals
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Rated voltage19 ... 30 V DC
loop powered
Safety Integrity Level (SIL)SIL 3
Voltagetyp. 12 V

Comments

No comments yet

Write a comment