Pepperl+Fuchs KCD2-SR-1.LB Switch Amplifier

Pepperl+Fuchs KCD2-SR-1.LB
Item Number: KCD2-SR-1.LB
  • 1-channel signal conditioner
  • 24 V DC supply (Power Rail)
  • Dry contact or NAMUR inputs
  • Usable as signal splitter (1 input and 2 outputs)
  • Relay contact output
  • Fault relay contact output
  • Line fault detection (LFD)
  • Housing width 12.5 mm
  • Up to SIL 2 acc. to IEC 61508
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Connectionterminals 1+, 2-
Massapprox. 100 g
Output/Outputreinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Output IIsignal or error message ; relay
Switching point/switching hysteresis1.2 ... 2.1 mA / approx. 0.2 mA
Electromagnetic compatibilityNE 21:2006
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Pulse/Pause ratiomin. 20 ms / min. 20 ms
Degree of protectionIEC 60529
Energized/De-energized delay 20 ms / 20 ms
Dimensions12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2
Line fault detectionbreakage I 0.1 mA , short-circuit I 6.5 mA
Configurationvia DIP switches
Input/Outputreinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Output/power supplyreinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Rated valuesacc. to EN 60947-5-6 (NAMUR)
Degree of protectionIP20
Minimum switch current2 mA / 24 V DC
Ripple 10 %
Power consumption 500 mW
Connection sidecontrol side
Output Isignal ; relay
Switching frequency 10 Hz
Control elementsDIP-switch
Rated current 30 mA
Rated voltage19 ... 30 V DC
Signal typeDigital Input
Power dissipation 500 mW
Contact loading253 V AC/2 A/cos andphi; > 0.7; 126.5 V AC/4 A/cos andphi; > 0.7; 30 V DC/2 A resistive load
ConnectionPower Rail or terminals 9+, 10-
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Display elementsLEDs
Labelingspace for labeling at the front
Open circuit voltage/short-circuit currentapprox. 10 V DC / approx. 8 mA
Connectionoutput I: terminals 5, 6 ; output II: terminals 7, 8
Safety Integrity Level (SIL)SIL 2
Mechanical life107 switching cycles
Input/power supplyreinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Connectionscrew terminals
Connection sidefield side
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)

Comments

No comments yet

Write a comment