Pepperl+Fuchs KCD2-STC-1.SP SMART Transmitter Power Supply

Pepperl+Fuchs KCD2-STC-1.SP
Item Number: KCD2-STC-1.SP
  • 1-channel signal conditioner
  • 24 V DC supply (Power Rail)
  • Input for 2-wire SMART transmitters and current sources
  • Output for 4 mA ... 20 mA or 1 V ... 5 V
  • Sink or source mode
  • Housing width 12.5 mm
  • Connection via spring terminals with push-in connection technology
  • Up to SIL 2 acc. to IEC 61508
228.20
Quantity
-
+
Total price: 228.20
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Deviationat 20 В°C (68 В°F)
≤ В± 0.1 % incl. non-linearity and hysteresis (source mode 4 ... 20 mA)
≤ В± 0.2 % incl. non-linearity and hysteresis (sink mode 4 ... 20 mA)
≤ В± 0.2 % incl. non-linearity and hysteresis (source mode 1 ... 5 V)
Connection sidecontrol side
Connectionspring terminals
Output signal4 ... 20 mA or 1 ... 5 V (on 250 Ω, 0.1 % internal shunt)
4 ... 20 mA (sink mode), operating voltage 15.5 ... 26 V
Optional accessories- power feed module KFD2-EB2(.R4A.B)(.SP)
- universal power rail UPR-03(-M)(-S)
- profile rail K-DUCT-GY(-UPR-03)
Frequency rangebandwidth at 0.5 Vss signal 0 ... 3 kHz (-3 dB)
Signal typeAnalog input
Degree of protectionIEC 60529:2001
Electromagnetic compatibilityNE 21:2006
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Voltage dropterminals 3+, 4- : approx. 5 V
Output/power supplyreinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Connection sidefield side
Load0 ... 300 Ω (source mode)
Input/Outputreinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Degree of protectionIP20
Labelingspace for labeling at the front
Input signal4 ... 20 mA limited to approx. 30 mA
Massapprox. 100 g
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Available voltageterminals 1+, 2-: ≥ 15 V at 20 mA
Dimensions12.5 x 114 x 124 mm (0.5 x 4.5 x 4.9 inch) , housing type A2
Display elementsLED
Open circuit voltage/short-circuit currentterminals 1+, 2-: 22 V / 30 mA
Power dissipation≤ 800 mW
Connectionterminals 1+, 2-; 3+, 4-
Settling time≤ 200 ms
ConnectionPower Rail or terminals 9+, 10-
Safety Integrity Level (SIL)SIL 2
Rated voltage19 ... 30 V DC
Ripple20 mV rms
Power consumption≤ 1.1 W
Rated current≤ 45 mA
Control elementsDIP-switch
Rise time/fall time≤ 20 ms
Configurationvia DIP switches
Ripple≤ 10 %
Input/power supplyreinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Connectionterminals 5-, 6+

Comments

No comments yet

Write a comment