Pepperl+Fuchs KCD2-STC-Ex1-Y1
SMART Transmitter Power Supply
- 1-channel isolated barrier
- 24 V DC supply (Power Rail)
- Input for 2-wire SMART transmitters
- Output for 4 mA ... 20 mA or 1 V ... 5 V
- Sink or source mode
- Housing width 12.5 mm
- Up to SIL 2 acc. to IEC 61508
Item Number:
KCD2-STC-Ex1-Y1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Rise time/fall time | 20 ms |
| IECEx approval | IECEx CES 06.0001 |
| Power dissipation | 800 mW |
| Output signal | 4 ... 20 mA or 1 ... 5 V (on 250 andOmega;, 0.1 % internal shunt) 4 ... 20 mA (sink mode), operating voltage 15.5 ... 26 V |
| Rated current | 45 mA |
| Connection | terminals 1+, 2- |
| Ripple | 10 % |
| Open circuit voltage/short-circuit current | terminals 1+, 2-: 22 V / 30 mA |
| Connection | terminals 5-, 6+ |
| Ripple | 20 mV rms |
| Output/power supply | reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff |
| Input/power supply | reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff |
| Safety Integrity Level (SIL) | SIL 2 |
| Connection side | field side |
| Mass | approx. 100 g |
| Control elements | DIP-switch |
| Dimensions | 12.5 x 114 x 124 mm (0.5 x 4.5 x 4.9 inch) , housing type A2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Signal type | Analog input |
| Electromagnetic compatibility | NE 21:2006 |
| Load | 0 ... 300 andOmega; (source mode) |
| Degree of protection | IP20 |
| Optional accessories | - power feed module KFD2-EB2(.R4A.B)(.SP) - universal power rail UPR-03(-M)(-S) - profile rail K-DUCT-BU(-UPR-03) |
| Connection | Power Rail or terminals 9+, 10- |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Connection | screw terminals |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Degree of protection | IEC 60529:2001 |
| Available voltage | terminals 1+, 2-: 15 V at 20 mA |
| Configuration | via DIP switches |
| Settling time | 200 ms |
| Display elements | LED |
| Equipment | terminals 1+, 2- |
| Input/Output | reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff |
| Power consumption | 1.1 W |
| Deviation | at 20 В°C (68 В°F) В± 0.1 % incl. non-linearity and hysteresis (source mode 4 ... 20 mA) В± 0.2 % incl. non-linearity and hysteresis (sink mode 4 ... 20 mA) В± 0.2 % incl. non-linearity and hysteresis (source mode 1 ... 5 V) |
| Certificate | PF 06 CERT 0973 X |
| Rated voltage | 19 ... 30 V DC |
| Frequency range | field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB) |
| Labeling | space for labeling at the front |
| Input signal | 4 ... 20 mA limited to approx. 30 mA |
| Connection side | control side |
| EU-Type Examination Certificate | CESI 06 ATEX 021 |
Comments
No comments yet