Pepperl+Fuchs KFA5-SOT2-Ex2
Switch Amplifier

Pepperl+Fuchs KFA5-SOT2-Ex2
  • 2-channel isolated barrier
  • 115 V AC supply
  • Dry contact or NAMUR inputs
  • Passive transistor output, non-polarized
  • Line fault detection (LFD)
  • Reversible mode of operation
  • Up to SIL 2 acc. to IEC 61508
Item Number: KFA5-SOT2-Ex2
325.41
-
+
Total price: 325.41
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Input/Outputreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Power dissipation1 W
Labelingspace for labeling at the front
EU-Type Examination CertificatePTB 98 ATEX 2164
Output/Outputnot available
Connection sidecontrol side
Rated voltage103.5 ... 126.5 V AC , 45 ... 65 Hz
Signal level1-signal: switching voltage - 2.5 V max. at 10 mA switching current or 3 V max. at 100 mA switching current
0-signal: switched off (off-state current ≤ 10 µA)
Output/power supplyreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Connectionterminals 14, 15
Switching point/switching hysteresis1.2 ... 2.1 mA / approx. 0.2 mA
Switching frequency≤ 5 kHz
Display elementsLEDs
Massapprox. 150 g
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Degree of protectionIP20
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Connectionoutput I: terminals 7, 8 ; output II: terminals 8, 9
Electromagnetic compatibilityNE 21:2012
Control elementsDIP-switch
Connectionscrew terminals
Rated valuesacc. to EN 60947-5-6 (NAMUR), see system description for electrical data
Dimensions20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2
Output I, IIsignal ; electronic output, passive
Switching voltagemax. 40 V
Connectionterminals 1+, 2+, 3-; 4+, 5+, 6-
Input/power supplyreinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Degree of protectionIEC 60529
Signal typeDigital Input
Mountingon 35 mm DIN mounting rail acc. to EN 60715:2001
Switching currentmax. 100 mA , short-circuit protected
Power consumptionmax. 1.5 W
Open circuit voltage/short-circuit currentapprox. 8 V DC / approx. 8 mA
Connection sidefield side
Line fault detectionbreakage I ≤ 0.1 mA , short-circuit I > 6 mA
Configurationvia DIP switches
Safety Integrity Level (SIL)SIL 2

Comments

No comments yet

Write a comment