Pepperl+Fuchs KFA6-ER-2.W.LB
Conductivity Switch Amplifier
- 2-channel signal conditioner
- 230 V AC supply
- Level sensing input
- Adjustable range 1 k Omega- ... 150 k Omega-
- Relay contact output
- Adjustable time delay up to 10 s
- Minimum/maximum control
- Line fault detection (LFD)
Item Number:
KFA6-ER-2.W.LB
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Connection side | field side |
| Switching power | max. 192 W , 2000 VA |
| Connection | terminals 1, 4 (mass), 2, 5 (min), 3, 6 (max) |
| Contact loading | 253 V AC/2 A/cos andphi; > 0.7; 40 V DC/2 A resistive load |
| Degree of protection | IEC 60529:2001 |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
| Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Connection side | control side |
| Control input | min./max. control system: terminals 1, 2, 3; 4, 5. 6 on/off control system: terminals 1, 3; 4, 6 |
| Degree of protection | IP20 |
| Signal type | Digital Input |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Labeling | space for labeling at the front |
| Rated current | 7 mA |
| Electromagnetic compatibility | NE 21:2006 |
| Connection | screw terminals , max. 2.5 mm2 |
| Power consumption | < 1.2 W |
| Configuration | via DIP switches via potentiometer |
| Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Connection | terminals 14, 15 |
| Time constant for signal damping | 0.5 s, 2 s, 5 s, 10 s |
| Response sensitivity | 1 ... 150 kandOmega; , adjustable via potentiometer |
| Rated voltage | 207 ... 253 V AC, 45 ... 65 Hz |
| Control elements | DIP-switch potentiometer |
| Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output | relay |
| Mass | approx. 150 g |
| Display elements | LEDs |
| Connection | terminals 7, 8, 9; 10, 11, 12 |
Comments
No comments yet