Pepperl+Fuchs KFD2-BR-1.PA.1500
Basic Segment Coupler
Output: 24 ... 26 V/400 mA
Couples PROFIBUS PA devices transparently to PROFIBUS DP
High-power trunk for high device count and long cable lengths
- Overview
- Comments
Installation in Zone 2/Class I, Div. 2
Up to 1.5 MBit auto-adapting
PROFIBUS DP terminator selectable
Power Rail support
Shock resistance | EN 60068-2-27 |
Shock resistance | 15 g 11 ms |
Vibration resistance | EN 60068-2-6 |
Degree of protection | IP20 |
LED DP/ERR | red 2 Hz flashing: DP error red on: Hardware error red off: DP communication detected |
Ripple | 10 % |
Housing material | Polycarbonate |
PROFIBUS PA/Supply | basic insulation according to IEC/EN 61010, rated insulation voltage 253 V AC /357 V DC |
Relative humidity | < 95 % non-condensing |
Vibration resistance | 1 g 10 ... 150 Hz |
Mounting | DIN rail mounting |
Rated voltage | 20 ... 30 V DC |
Design / Mounting | Cabinet installation |
Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) |
Rated current | 640 mA ... 365 mA |
Power dissipation | max 2.5 W |
Switch | PROFIBUS DP terminator |
Mass | 180 g |
PROFIBUS DP/Supply | basic insulation according to IEC/EN 61010, rated insulation voltage 253 V AC /357 V DC |
Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 |
Fieldbus standard | EN 50170/2 |
Connection | Power Rail or terminals 11 (L+), 12 (L-) |
LED PWR | green: Power on |
Statement of conformity | TГњV 16 ATEX 7831 X |
Core cross-section | up to 2.5 mm2 |
Pollution degree | max. 2, according to IEC 60664 |
LED PA | red 2 Hz flashing: No PA communication or overload Off: PA communication OK |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Climatic conditions | DIN IEC 721 |
PROFIBUS DP/PROFIBUS PA | functional insulation acc. to IEC 62103, rated insulation voltage 50 V AC /70 V DC |
Connection type | Terminals |
Electromagnetic compatibility | NAMUR NE 21 |
CSA approval | CSA 16.70064204 |
Degree of protection | IEC/EN 60529 |
PROFIBUS DP | PROFIBUS with RS-485 transmission technology |
Comments
No comments yet