Pepperl+Fuchs KFD2-ELD-Ex16 Ground Fault Detection
Item Number: KFD2-ELD-Ex16
- 16-channel isolated barrier
- 24 V DC supply (Power Rail)
- Analog or digtial field device inputs
- Monitors leakage current
- Fault relay contact output
- LED status indication
- Test circuit for validation
- Parallel connection for easy integration
- Conformal coating
- Overview
- Datasheet
- Alternative numbers
- Comments
Control elementsDIP-switch
| Ground connection | terminal 17 |
| Mechanical life | 107 switching cycles |
| Function | Test input: 24 V DC / 5 mA; non-polarized |
| Connection | terminals 19, 20, 21 |
| Ripple | ≤ 10 % |
| Connection side | field side |
| Degree of protection | IEC 60529:2001 |
| Mass | approx. 260 g |
| EU-type examination certificate | TГњV 00 ATEX 1585 |
| Connection | intrinsically safe: terminals 1 ... 16 non-intrinsically safe: terminals 28, 29 |
| Dimensions | 60 x 119 x 115 mm (2.4 x 4.7 x 4.5 inch) , housing type D2 |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Signal type | Analog input |
| Output | signal ; relay |
| Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Labeling | space for labeling at the front |
| Connection side | control side |
| Connection | Power Rail or terminals 44+, 45- |
| Electromagnetic compatibility | NE 21:2007 |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Connection | screw terminals |
| Rated values | 5 Vpp, 0.1 mA; rectangular |
| Degree of protection | IP20 |
| Response delay | ≤ 50 s |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Contact loading | 253 V AC/2 A /cos φ > 0.7; 40 V DC/2 A resistive load; |
| Configuration | via DIP switches |
| Display elements | LEDs |
| Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Rated voltage | 20 ... 30 V DC |
| Rated current | ≤ 50 mA |
Comments
No comments yet