Pepperl+Fuchs KFD2-GS-1.2W
Current/Voltage Trip Value
- 1-channel signal conditioner
- 24 V DC supply (Power Rail)
- Current and voltage input
- 2 relay contact outputs
- Programmable high/low alarm
- Configurable via DIP switches and potentiometer
- Terminal blocks with test sockets
Item Number:
KFD2-GS-1.2W
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Datasheet
- Alternative numbers
- Comments
Measurement rangeterminals 1+, 3-: voltage 0/1 ... 5 V, load 50 kandOmega; or voltage 0/2 ... 10 V, load 100 kandOmega;
terminals 2+, 3-: current 0/4 ... 20 mA ; load 50 andOmega;
| Deviation | 1 % |
| Rated voltage | 20 ... 30 V DC |
| Degree of protection | IEC 60529 |
| Connection side | field side |
| Control elements | DIP-switch potentiometer |
| Power consumption | < 1.5 W |
| Output III | device configuration : terminals 4, 5, 6 |
| Output I, II/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Signal type | Analog input |
| Output I, II | terminals 7, 8, 9; 10, 11, 12 |
| Degree of protection | IP20 |
| Mass | approx. 120 g |
| Connection | Power Rail or terminals 14+, 15- |
| Labeling | space for labeling at the front |
| Input/output I, II | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Connection side | control side |
| Optional accessories | - power feed module KFD2-EB2(.R4A.B)(.SP) - universal power rail UPR-03(-M)(-S) - profile rail K-DUCT-GY(-UPR-03) |
| Dimensions | 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) , housing type B2 |
| Rated current | < 50 mA |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Input delay | 200 ms |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Connection | screw terminals |
| Protection against electrical shock | EN 61010-1:2010 |
| Configuration | via DIP switches via potentiometer |
| Display elements | LEDs |
Comments
No comments yet