Pepperl+Fuchs KFD2-GUT-1.D
Temperature Converter with Trip Values
- 1-channel signal conditioner
- 24 V DC supply (Power Rail)
- Thermocouple, RTD, potentiometer or voltage input
- Redundant TC input
- Current output 0/4 mA ... 20 mA
- 2 relay contact outputs
- Configurable by PACTware or keypad
- Line fault (LFD) and sensor burnout detection
- Up to SIL 2 acc. to IEC 61508/IEC 61511
Item Number:
KFD2-GUT-1.D
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Sampling rateapprox. 700 ms
| Labeling | space for labeling at the front |
| Connection | terminals 23+, 24- or power feed module/Power Rail |
| Configuration | via operating buttons via PACTware |
| Output I, II | relay |
| Display elements | LEDs , display |
| Power dissipation/power consumption | 2 W / 2.2 W |
| Dimensions | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) , housing type C3 |
| Thermocouples | type B, E, J, K, L, N, R, S, T (IEC 584-1: 1995) |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Connection | screw terminals |
| Signal type | Analog input |
| Degree of protection | IEC 60529:2001 |
| Voltage | 0 ... 10 V , 2 ... 10 V , 0 ... 1 V , -100 ... 100 mV |
| RTD | Pt100, Pt500, Pt1000, Ni100, Ni1000 |
| Safety Integrity Level (SIL) | SIL 2 |
| Connection side | control side |
| Connection | terminals 1, 2, 3, 4, 6 |
| Control elements | Control panel |
| Rated voltage | 20 ... 30 V DC |
| Connection side | field side |
| Rated current | approx. 100 mA |
| Potentiometer | 0.8 ... 20 kandOmega; |
| Programming interface | programming socket |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Input resistance | 250 kandOmega; (0 ... 10 V) min. 1 MandOmega; (0 ... 1 V, -100 ... 100 mV) |
| Electromagnetic compatibility | NE 21:2007 |
| Degree of protection | IP20 |
| Collective error message | Power Rail |
| Output III | Analog current output |
| Mass | 300 g |
| Connection | output I: terminals 10, 11, 12 output II: terminals 16, 17, 18 output III: terminals 8+, 7- |
Comments
No comments yet