Pepperl+Fuchs KFD2-HLC-Ex1.D
HART Loop Converter
- 1-channel isolated barrier
- 24 V DC supply (Power Rail)
- HART field device input with transmitter power supply
- Usable as signal splitter (1 input and several outputs)
- 3 analog outputs 4 mA ... 20 mA
- Sink and source mode output
- Configurable by keypad
Item Number:
KFD2-HLC-Ex1.D
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Connection sidefield side
| Power dissipation | 2.3 W |
| Mass | 300 g |
| Configuration | via operating buttons via PACTware |
| Current range | 4 ... 20 mA , (source or sink mode) |
| Output I/II/III/power supply | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff |
| Connection | Power Rail or terminals 23+, 24- |
| Optional accessories | - power feed module KFD2-EB2(.R4A.B)(.SP) - universal power rail UPR-03(-M)(-S) - profile rail K-DUCT-BU(-UPR-03) |
| EU-Type Examination Certificate | BASEEFA 07 ATEX 0174 |
| Connection | output I: terminals 7, 8, 9 , output II: terminals 13, 14, 15 , output III: terminals 19, 20, 21 |
| Dimensions | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) , housing type C3 |
| Signal type | Analog input |
| Programming interface | programming socket |
| Input resistance | 250 andOmega; , 5 % (terminals 2, 3 and with jumper on 5, 6) |
| Connection | terminals 1, 2, 3, 4, 5, 6 |
| Degree of protection | IEC 60529:2001 |
| Output I, II, III | terminals 7, 8, 9; 13, 14, 15; 19, 20, 21 non-intrinsically safe |
| Certificate | PF 07 CERT 1142 X |
| Control elements | Control panel |
| Other outputs | HART communicator on terminals 22, 24 |
| Equipment | terminals 1, 4/3 (with link between terminals 4 and 5) |
| Rated voltage | 19 ... 30 V DC |
| Connection side | control side |
| Power consumption | 2.9 W |
| Fault signal | downscale I 2 mA, upscale I 21.5 mA (acc. NAMUR NE43) or hold measurement value |
| Open circuit voltage/short-circuit current | typ. 24 V / 28 mA |
| Display elements | LEDs , display |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Output signal | analog |
| Conformity | HART field device input (revision 5 to 7) |
| Available voltage | 15.5 V at 20 mA, short-circuit protected |
| Degree of protection | IP20 |
| Labeling | space for labeling at the front |
| Connection | screw terminals |
| Electromagnetic compatibility | NE 21:2006 |
| Rated current | approx. 120 mA at 24 V DC |
| Collective error message | Power Rail and LED red |
| Equipment | terminals 2, 5/3 |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Voltage range | 5 ... 30 V , sink mode from external supply |
| Load | max. 650 andOmega; , source mode |
Comments
No comments yet