Pepperl+Fuchs KFD2-HLC-Ex1.D.4S
HART Loop Converter
- 1-channel isolated barrier
- 24 V DC supply (Power Rail)
- HART field device input with transmitter power supply
- Usable as signal splitter (1 input and several outputs)
- 4 relay contact outputs (NO contact)
- 3 analog outputs 4 mA ... 20 mA
- Sink and source mode output
- Configurable by keypad
Item Number:
KFD2-HLC-Ex1.D.4S
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Equipment | terminals 1, 4/3 (with link between terminals 4 and 5) |
Power dissipation | 2.7 W |
Configuration | via operating buttons via PACTware |
Labeling | space for labeling at the front |
Connection | Power Rail or terminals 23+, 24- |
Output I, II/III, IV | functional insulation acc. to IEC 62103, rated insulation voltage 250 Veff |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Output V/VI/VII/power supply | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff |
Connection side | field side |
Equipment | terminals 2, 5/3 |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Conformity | HART field device input (revision 5 to 7) |
Rated voltage | 19 ... 30 V DC |
Dimensions | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) , housing type C3 |
EU-Type Examination Certificate | BASEEFA 07 ATEX 0174 |
Connection | terminals 1, 2, 3, 4, 5, 6 |
Output I, II, III, IV/other circuits | reinforced insulation acc. to IEC 62103, rated insulation voltage 300 Vrms |
Signal type | Analog input |
Output V, VI, VII | terminals 7, 8, 9; 13, 14, 15; 19, 20, 21 , non-intrinsically safe |
Control elements | Control panel |
Input resistance | 250 andOmega; , 5 % (terminals 2, 3 and with jumper on 5, 6) |
Connection | output I: terminals 10, 11, output II: terminals 11, 12, output III: terminals 16, 17, output IV: terminals 17, 18 output V: terminals 7, 8, 9, output VI: terminals 13, 14, 15, output VII: terminals 19, 20, 21 |
Other outputs | HART communicator on terminals 22, 24 |
Optional accessories | - power feed module KFD2-EB2(.R4A.B)(.SP) - universal power rail UPR-03(-M)(-S) - profile rail K-DUCT-BU(-UPR-03) |
Connection | screw terminals |
Connection side | control side |
Relay | programmable either for fault or trip value (with direction, hysteresis and delay) |
Display elements | LEDs , display |
Rated current | approx. 140 mA at 24 V DC |
Electromagnetic compatibility | NE 21:2006 |
Mass | 300 g |
Certificate | PF 07 CERT 1141 X |
Output I, II, III, IV | terminals 10, 11; 11, 12; 16, 17; 17, 18 , non-intrinsically safe |
Degree of protection | IP20 |
Power consumption | 3.3 W |
Open circuit voltage/short-circuit current | typ. 24 V / 28 mA |
Collective error message | Power Rail and LED red |
Programming interface | programming socket |
Degree of protection | IEC 60529:2001 |
Available voltage | 15.5 V at 20 mA, short-circuit protected |
Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
People also buy
Comments
No comments yet