Pepperl+Fuchs KFD2-RSH-1.2D.FL3
Relay Module
We ship to United States of America!
- 1-channel signal conditioner
- 24 V DC supply
- Logic input 19 V DC ... 26.4 V DC
- Recommended connectable voltage 50 V AC ... 230 V AC, 60 V DC ... 110 V DC
- Relay contact output for de-energized to safe function
- Line fault transparency (LFT)
- Diagnostic function
- Up to SIL 3 acc. to IEC 61508
- Up to PL e acc. to EN/ISO 13849
Item Number:
KFD2-RSH-1.2D.FL3
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
Contact our experts
- Overview +
- Comments +
| Line fault detection | low voltage < 35 V AC undercurrent: 10 mA AC; overcurrent: 5.5 A AC (relay energized) breakage: 48 kandOmega;; short-circuit: 29 andOmega; (load, relay de-energized) |
| Power consumption | < 1.7 W , includes the power consumption of the digital input , see derating curves |
| Safety Integrity Level (SIL) | SIL 3 |
| Mechanical life | 5 x 106 switching cycles |
| Connection | terminals 10, 11 |
| Pulse/Pause ratio | min. 150 ms / min. 150 ms with disabled internal fault detection min. 1 s / min. 1 s with enabled internal fault detection |
| Display elements | LEDs |
| Connection side | control side |
| Signal type | Digital Output |
| Contact loading | 253 V AC/5 A/cos andphi; 0.7; 30 V DC/5 A resistive load , see derating curves |
| Labeling | space for labeling at the front |
| Reaction time | < 2 s |
| Connection | terminals 7+, 8- |
| Control elements | DIP-switch |
| Degree of protection | IEC 60529:2013 |
| Switching frequency | < 3 Hz with disabled internal fault detection < 0.5 Hz with enabled internal fault detection |
| Configuration | via DIP switches |
| Connectable voltage | 50 ... 230 V AC 60 ... 110 V DC |
| Power dissipation | < 3.3 W at 5 A , see derating curves |
| Input/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
| Input/fault indication output | basic insulation according to IEC/EN 61010-1, rated insulation voltage 30 Veff |
| Performance level (PL) | PL e |
| Fuse rating | 2.5 A (scope of delivery) max. 5 AT, recommended maximum utilization of the fuse: 80 % |
| Rated current | 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: 36 mA (minimum load current DO card) |
| Inrush current | < 200 mA after 100 micro/s |
| Connection | Power Rail or terminals 14+, 15- |
| Degree of protection | IP20 |
| Minimum switch current | 10 mA |
| Connection side | field side |
| Electromagnetic compatibility | NE 21:2012 , EN 61326-3-2:2008 , EN 61326-3-1:2008 |
| Connection | screw terminals |
| Input current | 35 mA at 24 V DC , max. 44 mA at 19 V DC , with enabled internal fault detection |
| Test pulse length | max. 2 ms from DO card |
| Rated voltage | 19 ... 26.4 V DC |
| Mass | approx. 142 g |
| Contact loading | 30 V DC/ 0.5 A resistive load |
| Connection | external voltage : terminals 4+, 5+, 2- load : terminals 6, 3 |
| Mechanical life | 105 switching cycles |
| Signal level | 0-signal: -5 ... 5 V DC 1-signal: 19 ... 26.4 V DC |
| Ambient temperature | -20 ... 60 ?°C (-4 ... 140 ?°F) Observe the temperature range limited by derating, see section derating. |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Output/other circuits | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
Buy Pepperl+Fuchs KFD2-RSH-1.2D.FL3 with the best possible price and delivery terms on eltra-trade.com
Find the industrial control components you need at eltra-trade.com. Our catalog offers a variety of sizes and types, all available for prompt delivery. Enjoy competitive pricing and excellent customer service. Trust us to fulfill your automation equipment requirements efficiently and reliably.
Comments
No comments yet