Pepperl+Fuchs KFD2-SL2-Ex1
Solenoid Driver
- 1-channel isolated barrier
- 24 V DC supply (Power Rail)
- Output 45 mA at 11.7 V DC
- Logic input, non-polarized
- Line fault detection (LFD)
- Up to SIL 2 acc. to IEC 61508
Item Number:
KFD2-SL2-Ex1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Degree of protectionIP20
| Signal type | Digital Output |
| Open loop voltage | min. 24 V |
| Connection side | control side |
| Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Power supply/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Connection | terminals 7, 8 |
| Certificate | TГњV 02 ATEX 1820 X |
| Optional accessories | - power feed module KFD2-EB2(.R4A.B)(.SP) - universal power rail UPR-03(-M)(-S) - profile rail K-DUCT-BU(-UPR-03) |
| Power consumption | max. 1.7 W at 45 mA output current |
| Signal level | 1-signal: 16 ... 30 V DC 0-signal: 0 ... 5 V DC |
| Display elements | LEDs |
| Rated voltage | 20 ... 30 V DC |
| Current | 45 mA |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Mass | approx. 150 g |
| Energized/De-energized delay | 20 ms / 20 ms |
| Voltage | 11.7 V |
| Connection side | field side |
| Electromagnetic compatibility | NE 21:2006 |
| Internal resistor | 272 andOmega; |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Connection | terminals 1+, 2- or 3- |
| Input current | approx. 3 mA at 24 V DC |
| Safety Integrity Level (SIL) | SIL 2 |
| Protection against electrical shock | EN 61010-1:2010 |
| Line fault detection | signal at short-circuit RB < 30 andOmega;, lead breakage RB > 15 kandOmega; , test current < 500 andmicro;A |
| EU-Type Examination Certificate | ZELM 00 ATEX 0024 |
| Connection | Power Rail or terminals 14+, 15- |
| Labeling | space for labeling at the front |
| Control elements | DIP-switch |
| Configuration | via DIP switches |
| Degree of protection | IEC 60529:2001 |
| Output signal | These values are valid for the rated operating voltages from 20 ... 30 V DC. |
| Connection | screw terminals |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Comments
No comments yet