Pepperl+Fuchs KFD2-SLD-Ex1.13100
Solenoid Driver
- 1-channel isolated barrier
- 24 V DC supply (Power Rail)
- Logic input
- Output 100 mA at 13 V DC
- Alternating outputs for the operation of solenoids with 2 coils
- High output power for IIB gas group
- Line fault transparency (LFT)
- Test pulse immunity
- Up to SIL 3 acc. to IEC 61508
Item Number:
KFD2-SLD-Ex1.13100
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Connection | screw terminals |
| Degree of protection | IEC 60529:2001 |
| Protection against electrical shock | EN 61010-1:2010 |
| Switching frequency | max. 2 Hz |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Voltage | 13 V |
| Rated voltage | 19 ... 30 V DC loop powered |
| Connection side | control side |
| Signal type | Digital Output |
| Input/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
| Power dissipation | 1.5 W at 24 V , 130 andOmega; load |
| Input/input | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
| Open loop voltage | typ. 19.2 V |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Mass | approx. 200 g |
| Energized/De-energized delay | 30 ms / 30 ms |
| Load | nominal 0.08 ... 1 kandOmega; |
| Input current | approx. 6 mA at 24 V DC |
| Connection side | field side |
| Internal resistor | approx. 64 andOmega; |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
| IECEx approval | IECEx EXA 17.0019X |
| Configuration | via DIP switches |
| Electromagnetic compatibility | NE 21:2011 For further information see system description. |
| Degree of protection | IP20 |
| Current | typ. 100 mA |
| Current limit | 105 mA |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Safety Integrity Level (SIL) | SIL 3 |
| EU-Type Examination Certificate | EXA 17 ATEX 0076X |
| Connection | Power Rail or terminals 14+, 15- |
| Connection | channel 1: terminals 1+, 2-, 3 channel 2: terminals 4+, 5-, 6- |
| Display elements | LEDs |
| Line fault detection | signal at short-circuit RB < 30 andOmega;, lead breakage RB > 10 kandOmega; , test current < 4 mA pulsing (20 ms On, 200 ms Off) |
| Output/other circuits | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Optional accessories | - power feed module KFD2-EB2(.R4A.B)(.SP) - universal power rail UPR-03(-M)(-S) - profile rail K-DUCT-BU(-UPR-03) |
| Input current | 115 mA at 24 V , 130 andOmega; load |
| Output/Output | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
| Signal level | 1-signal: 15 ... 30 V DC 0-signal: 0 ... 5 V DC |
| Labeling | space for labeling at the front |
| Control elements | DIP-switch |
| Connection | channel 1: terminals 7+, 8- |
Comments
No comments yet