Pepperl+Fuchs KFD2-SR3-Ex2.2S
Switch Amplifier
- 2-channel isolated barrier
- 24 V DC supply (Power Rail)
- Dry contact or NAMUR inputs
- Usable as signal splitter (1 input and 2 outputs)
- 2 x 2 relay contact outputs with AND logic
- Reversible mode of operation
- Line fault detection (LFD)
- Up to SIL 2 acc. to IEC 61508
Item Number:
KFD2-SR3-Ex2.2S
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
| Ripple | 10 % |
| Display elements | LEDs |
| Minimum switch current | 1 mA / 24 V DC |
| Optional accessories | power feed module KFD2-EB2 Universal Power Rail UPR-03 Universal Power Rail UPR-03-S profile rail K-DUCT-BU profile rail K-DUCT-UPR-03 |
| IECEx approval | IECEx EXA 16.0001X |
| Mass | approx. 150 g |
| Connection | screw terminals |
| Pulse/Pause ratio | min. 20 ms / min. 20 ms |
| Contact loading | 48 V AC/1 A/cos andphi; > 0.7; 40 V DC/1 A resistive load |
| Collective error message | Power Rail |
| Input | EN 60947-5-6:2000 |
| Line fault detection | breakage I 0.1 mA , short-circuit I 6.5 mA |
| Signal type | Digital Input |
| Connection | output I: terminals 7, 8 ; output II: terminals 8, 9 ; output III: terminals 10, 11 ; output IV: terminals 11, 12 |
| Rated current | 30 ... 20 mA |
| Mechanical life | 108 switching cycles |
| EU-Type Examination Certificate | EXA 16 ATEX 0001 X |
| Output/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 32 Veff , functional insulation, rated insulation voltage 50 Veff |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Rated voltage | 19 ... 30 V DC |
| Connection | Power Rail or terminals 14+, 15- |
| Configuration | via DIP switches |
| Energized/De-energized delay | approx. 20 ms / approx. 20 ms |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Power consumption | < 600 mW |
| Safety Integrity Level (SIL) | SIL 2 |
| Connection side | control side |
| Degree of protection | IEC 60529:2001 |
| Labeling | space for labeling at the front |
| Degree of protection | IP20 |
| Connection | terminals 1+, 2+, 3-; 4+, 5+, 6- |
| Rated values | acc. to EN 60947-5-6 (NAMUR) |
| Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Output/Output | basic insulation according to IEC/EN 61010-1, rated insulation voltage 32 Veff , functional insulation, rated insulation voltage 50 Veff |
| Output I, II, III, IV | channel 1, 2; relay |
| Electromagnetic compatibility | NE 21:2012 , EN 61326-3-2:2008 |
| Switching frequency | 10 Hz |
| Open circuit voltage/short-circuit current | approx. 10 V DC / approx. 8 mA |
| Connection side | field side |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Control elements | DIP-switch |
Comments
No comments yet