Pepperl+Fuchs KFD2-UT2-Ex1
Universal Temperature Converter
1-channel isolated barrier
24 V DC supply (Power Rail)
Thermocouple, RTD, potentiometer or voltage input
- Overview
- Comments
CertificateTГњV 02 ATEX 1797 X
Current output 0/4 mA ... 20 mA
Sink or source mode
Configurable by PACTware
Line fault (LFD) and sensor burnout detection
Up to SIL 2 acc. to IEC 61508/IEC 61511
Voltage | selectable within the range -100 ... 100 mV |
Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
Connection | screw terminals |
Programming interface | programming socket |
Rated voltage | 20 ... 30 V DC |
Configuration | via PACTware |
Output | Analog current output |
Connection side | field side |
RTD | type Pt10, Pt50, Pt100, Pt500, Pt1000 (EN 60751: 1995) type Pt10GOST, Pt50GOST, Pt100GOST, Pt500GOST, Pt1000GOST (6651-94) type Cu10, Cu50, Cu100 (P50353-92) type Ni100 (DIN 43760) |
Potentiometer | 0 ... 20 kandOmega; (2-wire connection), 0.8 ... 20 kandOmega; (3-wire connection) |
Thermocouples | type B, E, J, K, N, R, S, T (IEC 584-1: 1995) type L (DIN 43710: 1985) type TXK, TXKH, TXA (P8.585-2001) |
Connection side | control side |
Connection | terminals 1, 2, 3, 4 |
Ripple | within the supply tolerance |
Display elements | LEDs |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Degree of protection | IEC 60529:2001 |
Input resistance | 1 MandOmega; (-100 ... 100 mV) |
Connection | output I: terminal 7: source (-), sink (+), terminal 8: source (+), terminal 9: sink(-) |
Mass | approx. 130 g |
Connection | terminals 14+, 15- or power feed module/Power Rail |
Safety Integrity Level (SIL) | SIL 2 |
Labeling | space for labeling at the front |
Signal type | Analog input |
EU-Type Examination Certificate | CESI 04 ATEX 143 |
Degree of protection | IP20 |
Electromagnetic compatibility | NE 21:2006 |
Power dissipation/power consumption | 0.98 W / 0.98 W |
Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
Reaction time | worst case value (sensor breakage and/or sensor short circuit detection enabled) mV: 1 s, thermocouples with CJC: 1.1 s, thermocouples with fixed reference temperature: 1.1 s, 3- or 4-wire RTD: 920 ms, 2-wire RTD: 800 ms, Potentiometer: 2.05 s |
Comments
No comments yet