Pepperl+Fuchs KT-MB-GT2AD.FF
Advanced Diagnostic Gateway with Ethernet and FF-H1 Interface

Pepperl+Fuchs KT-MB-GT2AD.FF
  • System integration kit for Advanced Diagnostics
  • PCS integration via Diagnostic Manager or device DTM
  • Simple automatic setup of Advanced Diagnostics
  • Common alarm handling
  • For FOUNDATION Fieldbus and PROFIBUS PA
  • Installation in Zone 2
Item Number: KT-MB-GT2AD.FF
1395.61
-
+
Total price: 1395.61
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments

MountingDIN rail mounting

Relative humidity< 95 % non-condensing
Shock resistanceEN 60068-2-27
ProtocolTCP/IP and UDP/IP
ITK version6
Degree of protectionIP20
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F) hazardous area
-40 ... 70 В°C (-40 ... 158 В°F) safe area horizontal DIN rail mounting
LINK/ACTyellow
Housing heightsee dimensions
Fieldbus standardIEC 61158-2
CertificateTГњV 14 ATEX 115980 X
Terminationintegrated
Fieldbus/other circuitsfunctional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
Ethernet/Supplyfunctional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
Housing depthsee dimensions
Output IIalarm output diagnostic bus channel 2 , volt-free contact , NC contact
Pollution degreemax. 2, according to IEC 60664
Electromagnetic compatibilityNE 21
Vibration resistanceEN 60068-2-6
Number of Diagnostic Bus Channels2
Rated voltage9 ... 35 V SELV/PELV
Climatic conditionsDIN IEC 721
Shock resistance15 g 11 ms
Galvanic isolationIEC 62103
Rated current120 ... 70 mA
CH1, CH2yellow: diagnostic bus activity
Transfer rate100 MBit/s
Connection typeRJ-45 socket, 8-pin
Output I, II/other circuitsfunctional insulation acc. to IEC 62103, rated insulation voltage 250 Veff
Degree of protectionIEC 60529
Diagnostic Bus/other circuitsfunctional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
Physical layer profileprofile type 114
Port100 BASE-TX
Polaritypolarity-sensitive
Cable length/Channel30 m
Design / MountingMotherboard based
Vibration resistance1 g , 10 ... 150 Hz
Firmware updateEthernet
Ethernet/other circuitsfunctional insulation acc. to IEC 62103, rated insulation voltage 50 Veff
Corrosion resistanceacc. to ISA-S71.04-1985, severity level G3
Output Ialarm output diagnostic bus channel 1 , volt-free contact , NC contact
Number of Diagnostic Modules/Channel31 Using Ethernet Interface , 8 Using Fieldbus Interface
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Rated current0 mA
LED ERRred: Hardware fault
Housing materialPolycarbonate
Housing widthsee dimensions
Fieldbus typeFOUNDATION Fieldbus
Output IIIcommon alarm , volt-free contact , NC contact
LED PWRgreen: Power on
IECEx approvalIECEx TUN 14.0003X
Rated voltage19.2 ... 35 V DC SELV/PELV
EthernetIEEE 802.3
ServicesICMP , DHCP , AutoIP , HTTP
Power dissipationmax. 2.5 W
Mass470 g
Implementationresource block1x RS
function block4x MDI, 1x MDO, 1x MAI, 1x DI
transducer block16x ADM TB, 1x IO TB
All circuits/FEfunctional insulation acc. to IEC 62103, rated insulation voltage 50 Veff

Comments

No comments yet

Write a comment