Pepperl+Fuchs LB3006A
HART Transmitter Power Supply
We ship to United States of America!
- 4-channel
- Power supply for 2-wire transmitters with 4 mA ... 20 mA
- Installation in Zone 2 or safe area
- Supply circuit 21.5 V (4 mA)
- HART communication via field bus or service bus
- Simulation mode for service operations (forcing)
- Line fault detection (LFD): one LED per channel
- Permanently self-monitoring
- Module can be exchanged under voltage
Item Number:
LB3006A
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
Contact our experts
- Overview +
- Comments +
Electromagnetic compatibilityNE 21:2007
| Rated voltage | 12 V DC , only in connection with the power supplies LB9*** |
| Shock resistance | EN 60068-2-27:2009 |
| ATEX approval | BVS 12 ATEX E 115 X |
| Relative humidity | 95 % non-condensing |
| Damaging gas | EN 60068-2-42:2003 |
| Connection | backplane bus |
| Relative humidity | EN 60068-2-78:2001 |
| Transmitter supply voltage | min. 15 V at 20 mA ; 21.5 V at 4 mA |
| Ambient temperature | -20 ... 60 ?°C (-4 ... 140 ?°F) , 70 ?°C (non-Ex) |
| Power consumption | 2.7 W |
| Mass | approx. 90 g |
| Occupied slots | 1 |
| Dimensions | 16 x 100 x 102 mm (0.63 x 3.9 x 4 inch) |
| Connection | 2-wire transmitter (HART): supply circuit: channel I 1+, 2-, channel II 3+, 4-, channel III 5+, 6-, channel IV 7+, 8- |
| Input resistance | 15 andOmega; |
| Degree of protection | IEC 60529:2000 |
| IECEx approval | BVS 11.0068X |
| LED indication | Power LED (P) green: supply Diagnostic LED (I) red: module fault , red flashing: communication error , white: fixed parameter set (parameters from com unit are ignored) , white flashing: requests parameters from com unit Status LED (1-4) red: line fault (lead breakage or short circuit) |
| Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
| System information | The module has to be mounted in appropriate backplanes (LB9***) in Zone 2 or outside hazardous areas. Here, observe the corresponding declaration of conformity. For use in hazardous areas (e. g. Zone 2 or Zone 22) the module must be installed in an appropriate enclosure. |
| Storage temperature | -25 ... 85 ?°C (-13 ... 185 ?°F) |
| Vibration resistance | frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ?± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ?± 1 mm/0.7 g; 90 minutes at each resonance |
| Number of channels | 4 |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
| Connection | backplane bus |
| Connection | removable front connector with screw flange (accessory) wiring connection via spring terminals (0.14 ... 1.5 mm2) or screw terminals (0.08 ... 1.5 mm2) |
| Certificate | BVS 12 ATEX E 115 X |
| Coding | optional mechanical coding via front socket |
| Resolution | 12 Bit (0 ... 26 mA) |
| Environmental test | EN 60068-2-14:2009 |
| Line fault detection | can be switched on/off for each channel via configuration tool , configurable via configuration tool |
| Vibration resistance | EN 60068-2-6:2008 |
| Power dissipation | 1.5 W |
| Conversion time | max. 100 ms |
| HART communication | yes |
| Interface | manufacturer-specific bus to standard com unit |
| Refresh time | 100 ms |
| Shock resistance | shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 |
| HART secondary variable | no |
| Degree of protection | IP20 when mounted on backplane |
Buy Pepperl+Fuchs LB3006A with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. offers premium industrial control products. Our vast inventory and express delivery options ensure you receive your order quickly. We prioritize quality and customer satisfaction. Contact us today to learn more about our offerings and how we can assist your business.
Comments
No comments yet