Pepperl+Fuchs LB8106H0630
EasyCom Com Unit for PROFIBUS DP/DP-V1
We ship to United States of America!
- Interface between the I/O modules and the PCS/PLC
- Com unit for 80 analog or 184 digital channels
- Communication via PROFIBUS DP
- Mounting in Zone 2, Class I/Div.2 or in the safe area
- HART communication via PROFIBUS DP V1 or service bus
- Configuration via GSD parameters from the control system
- Non-volatile memory for configuration and parameter settings
- Self configuration in redundant systems
- Permanently self-monitoring
- Outputs drive to safe state in case of failures
- Module can be exchanged under voltage
Item Number:
LB8106H0630
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
The price and delivery terms is not final. Please check with the manager.
Contact our experts
- Overview +
- Comments +
| Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
| LED indication | LED P: (power supply): On = operating, fast flash = cold start LED 1: (collective alarm): On = internal fault, flashing = no fieldbus connection LED 2: (operating mode): flashing 1 (1:1 ratio) = active, normal operation; flashing 2 (7:1 ratio) = active, simulation LED 3: (status fieldbus): flashing = fieldbus receive channel active LED 4: (status fieldbus): flashing = fieldbus response channel active LED 5: (status service bus): flashing = service bus receive channel active LED 6: (status service bus): flashing = service bus response channel active |
| Certificate | PF 08 CERT 1234 X |
| Shock resistance | shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 |
| IECEx approval | BVS 09.0037X |
| Supported I/O modules | all LB remote I/O modules |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
| Fieldbus standard | IEC 61158-2 |
| Number of stations per bus segment | max. 31 (RS-485 standard) |
| Environmental test | EN 60068-2-14 |
| Vibration resistance | frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ?± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ?± 1 mm/0.7 g; 90 minutes at each resonance |
| Mass | approx. 120 g |
| Electromagnetic compatibility | NE 21 |
| Degree of protection | IEC 60529 |
| Dimensions | 32.5 x 100 x 102 mm (1.28 x 3.9 x 4 inch) |
| UL approval | E106378 |
| EAC approval | Russia: RU C-IT.MIII06.B.00129 |
| Fieldbus type | PROFIBUS DP/DP-V1 |
| GSE file | PFV61710.gsd/gse |
| Connection | via backplane |
| Shock resistance | EN 60068-2-27 |
| Relative humidity | EN 60068-2-56 |
| Connection | backplane bus |
| Relative humidity | 95 % non-condensing |
| Addressing | via configuration software |
| Number of repeaters between Master and Slave | max. 3 |
| PROFIBUS address | 0 ... 126 (factory standard setting: 126) |
| Vibration resistance | EN 60068-2-6 |
| ATEX approval | PF 08 CERT 1234 X |
| Damaging gas | EN 60068-2-42 |
| Storage temperature | -25 ... 85 ?°C (-13 ... 185 ?°F) |
| Number of stations per bus line | max. 125 (PROFIBUS), max. 119 (service bus) |
| Connection | backplane bus |
| Power consumption | 1.8 W |
| Rated voltage | 5 V DC , only in connection with the power supplies LB9*** |
| HART communication | via PROFIBUS or service bus |
| Cyclic process data | 240 bytes input and (simultaneously) 240 bytes output |
| System information | The module has to be mounted in appropriate backplanes (LB9***) in Zone 2 or outside hazardous areas. Here, observe the corresponding declaration of conformity. For use in hazardous areas (e. g. Zone 2, Zone 22 or Div. 2) the module must be installed in an appropriate enclosure. |
| Bus length | max. 1000 m (FOL, 1.5 MBaud), max. 1000 m (copper cable, 187.5 kBd), max. 200 m (copper cable, 1.5 MBd) |
| Redundancy | via backplane |
| Degree of protection | IP20 (module) , mounted on backplane |
| Ambient temperature | -20 ... 60 ?°C (-4 ... 140 ?°F) |
| Power dissipation | 1.8 W |
Buy Pepperl+Fuchs LB8106H0630 with the best possible price and delivery terms on eltra-trade.com
Make electrical parts online shopping with eltra-trade.com. Our product catalog includes a lot of items of automation equipment: motor control components, industrial sensors, pneumatic automation, low voltage products, and others. You can receive your order in any country in the world. By purchasing from our company, you receive quality products at low prices. We always reply very fast to requests from our customers. Among our customers are plenty of known world industrial companies.
Comments
No comments yet