Pepperl+Fuchs LC10-2-D 115 VAC Loop detector
Item Number: LC10-2-D 115 VAC
- Sensor system for vehicle detection
- Complete control interface for inductive loops laid beneath the surface
- Reliable detection with long service life
- Boost function for increasing sensitivity
- Test function
- Version with 2 loop channels
- Version with direction detection
- Overview
- Datasheet
- Alternative numbers
- Comments
| Calibration time | 2 s |
| Response time | 200 ms |
| Control elements | DIP-switch |
| Loop inductivity | 100 ... 1000 andmicro;H |
| Degree of protection | IP30 |
| Ambient temperature | -20 ... 70 В°C (-4 ... 158 В°F) |
| Ripple | -15 %/+10 % |
| Number of channels | 2 |
| MTTFd | 306 a |
| Operating voltage | 115 V AC ( galvanically isolated from loop ) |
| Loop frequency | 20 ... 120 kHz |
| Mission Time (TM) | 20 a |
| Marking | CE |
| Switching state | LED |
| Power consumption | 2.2 VA |
| Connection | Plug socket ; 11-pin Terminal connection 1.5 mm2 |
| Pulse length | period |
| Switching current | 6 A |
| Switching voltage | 250 V AC |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Operating mode | Continuous signal / Direction detection |
| Signal output | 2 relay outputs |
Comments
No comments yet