Pepperl+Fuchs LGM8
Light grid
We ship to United States of America!
- Measuring automation light grid with switching output
- Optical resolution 8 mm
- Super-fast object detection, even with 3-way beam crossover
- Object identification using integrated object recognition
- IO-Link interface for service and process data
- Temperature range to -30 ?°C
- Output of a measured value, can be selected from a number of measuring functions
Item Number:
LGM8
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
The price and delivery terms is not final. Please check with the manager.
Contact our experts
- Overview +
- Comments +
| Measuring automation light grid with beam spacing of 8 mm, IO-Link interface, push-pull output, fixed cable with M12 plug | ||
| Effective detection range | Standard : 0.3 ... 6 m | |
| Threshold detection range | 7.5 m | |
| Light source | IRED | |
| Light type | modulated infrared light , 850 nm | |
| Field height | see Table 1, max. 2100 mm | |
| Beam crossover | Factory setting: three beam crossing, deactivateable | |
| Beam blanking | adjustable max. 2 fixed suppressible beam areas (blanking) | |
| Beam spacing | 8.33 mm | |
| Number of beams | see Table 1, max. 253 | |
| Operating mode | Emitter: Emitter power adjustable in two ranges | |
| Optical resolution | without beam crossover: 8 mm with beam crossover: 4 mm with in 25% and 75% of the range | |
| Opening angle | 10 ?° | |
| Ambient light limit | > 50000 Lux (if external light source is outside the opening angle) | |
| MTTFd | 21 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 60 % | |
| Operation indicator | LED green: constantly on - power-on double pulse flashing (0.8 Hz) - undervoltage flashing (4 Hz) - short circuit flashing with short interruptions (1 Hz) - IO-Link mode | |
| Status indicator | Emitter: LED yellow constantly on - high emitter power constantly off - low emitter power flashing (8 Hz) - error message Receiver: LED yellow: constantly on - object detected constantly off - no object detected flashing (4 Hz) - below stability control limit flashing (8 Hz) - error message | |
| Control elements | Receiver: 2 touch buttons for programming | |
| Operating voltage | 18 ... 30 V DC | |
| Ripple | 10 % | |
| No-load supply current | Emitter ?‰¦: 50 mA Receiver: ?‰¦ 150 mA (without outputs) | |
| Time delay before availability | see Table 1, max. 3.8 s | |
| Interface type | IO-Link ( pin 4 ) | |
| IO-Link revision | 1.0 | |
| Device ID | 1050369 ... 1050389 ( 0x100701 ... 0x100715 ) | |
| COM-Mode | COM2 (38.4 kBit/s) | |
| Min. cycle time | 2.3 ms | |
| Process data width | 16 bit | |
| SIO mode support | yes | |
| Test input | Emitter switch-off with +UB or 0 V at pin 4 (emitter) | |
| Function input | Range input activation from 1.6 m with +UB or 0 V on pin 2 (emitter) Teach-In input for parameterization on pin 8 (receiver) | |
| Stability alarm output | Stability Control (SC) 1 PNP, short-circuit protected, reverse polarity protected on pin 2 (receiver) | |
| Switching type | Factory setting: dark on , Switchable to light-on mode | |
| Signal output | Command interface: Pin 4 IO-Link interface C or used as switching output Q; 1 short-circuit proof reverse polarity protected push-pull output (receiver) Switch output: Pin 5 switching output Q; 1 short-circuit proof reverse polarity protected push-pull output (receiver) synchronized with pin 4 | |
| Switching threshold | Factory setting: The signal tracking for the threshold value is deactivated, increasing the optical resolution by a maximum of 4 mm; switchable to active signal tracking | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Voltage drop | ?‰¦ 2 V DC | |
| Switching frequency | see Table 1, max. 118 Hz | |
| Response time | see Table 1, max. 20 ms | |
| Timer function | Off-delay programmable from 0 ... 1.25 s in 5 ms steps (adjustment via IO-Link only) | |
| Communication interface | IEC 61131-9 | |
| Product standard | EN 60947-5-2 | |
| Protection class | III ( IEC 61140 ) | |
| UL approval | cULus Listed | |
| CCC approval | CCC approval / marking not required for products rated ?‰¦36 V | |
| Ambient temperature | -30 ... 60 ?°C (-22 ... 140 ?°F) | |
| Storage temperature | -30 ... 70 ?°C (-22 ... 158 ?°F) | |
| Conductor cross section | min. 0.25 mm2 | |
| Housing width | 20 mm | |
| Housing depth | 30.5 mm | |
| Housing length L | see Table 1, max. 2260 mm | |
| Degree of protection | IP67 | |
| Connection | Emitter: connecting cable with 4-pin, M12 x 1 connector , 330 mm total length Receiver: connecting cable with 8-pin, M12 x 1 connector , 350 mm total length | |
| Material | ||
| Housing | extruded aluminum section , Silver anodized | |
| Optical face | Plastic pane , Polycarbonate | |
| Mass | see Table 1, max. 1200 g (per profile) | |
| Cable length | max. 30 m | |
| ECLASS 13.0 | 27270910 | |
| ECLASS 12.0 | 27270910 | |
| ECLASS 11.0 | 27270910 | |
| ECLASS 10.0.1 | 27270910 | |
| ECLASS 9.0 | 27270910 | |
| ECLASS 8.0 | 27270910 | |
| ECLASS 5.1 | 27270910 | |
| ETIM 9.0 | EC002549 | |
| ETIM 8.0 | EC002549 | |
| ETIM 7.0 | EC002549 | |
| ETIM 6.0 | EC002549 | |
| ETIM 5.0 | EC002549 | |
| UNSPSC 12.1 | 39121528 | |
Buy Pepperl+Fuchs LGM8 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. is a leading online electrical distributor. Our catalog features a vast selection of automation products from top brands. We deliver worldwide, offering competitive prices and timely shipments. Let us help you streamline your supply chain and improve your business efficiency.
Comments
No comments yet